User`s manual

10
Helpful hints and tips
Energy saving tips
We recommend that you follow the tips
below to save energy.
Try to avoid keeping the door open for long
periods in order to conserve energy.
Ensure the appliance is away from any
sources of heat (Direct sunlight, electric oven
or cooker etc)
Try to avoid keeping the door open for long
periods in order to conserve energy.
Ensure the appliance is away from any
sources of heat (Direct sunlight, electric oven
or cooker etc)
set the temperature colder than
necessary.
store warm food or evaporating liquid
in the appliance.
Place the appliance in a well ventilated,
humidity free, room. Please refer to Installing
your new appliance chapter.
If the diagram shows the correct
combination for the drawers, crisper and
shelves, do not adjust the combination as
this is designed to be the most energy
efficient configuration.
Don't
Don't
Hints for fresh food refrigeration
Don't place hot food directly into the
refrigerator or freezer, the internal
temperature will increase resulting in the
compressor to work harder and will
consume more energy.
Do cover or wrap the food,particularly if it
has a strong flavor.
Place food properly so that air can circulate
freely around it.
Hints for refrigeration
Meat (All Types) Wrap in polythene food:
wrap and place on the glass shelf above the
vegetable drawer. Always follow food
storage times and use by dates suggested
by manufacturers.
Cooked food, cold dishes, etc.:
They should be covered and may be placed
on any shelf.
Fruit and vegetables:
They should be stored in the special drawer
provided.
Freezer salver
The freezer salver is suitable for the
storage of small size food required to be
frozen.
If you want to remove it to save space,
please lift it up by applying force on its two
sides and pull it out. To return it, just do the
opposite.
Caution! Ensure that bottles are not stored
in the freezer as freezing may cause the
bottle to break.
Freezer salver
drawer
Ice cube tray
It is used to make ice cubes. To make ice
cubes, please fill water into the ice cube
trays and the water level shall not exceed
the top line(ideally eighty percent of the ice
tray volume). Place the tray into the lower
freezer drawer and wait at least two hours
for the ice cubes to be formed. After the
cubes are formed, gently twist the tray to
separate the cubes and trays.
Hisense Refrigerator