User`s manual

Hisense Refrigerator
8
①
②
③
12. Connect electrical connector① in
accordance with step 3 and then install
part②(which is in the plastic bag).
②upper hinge cover(left)
①
13.Reverse part① by 180°and install it
onto the right corner of the door，then
mount part②. (both of which are taken
down in step 2)
1
2
14. Take the reed switch out of the
coping block(part③in step 3)and mount
it on another block for use (which is
with mark “R” in the plastic bag). Put
the coping block just removed back to
the plastic bag.
15. ,
connector② , and then install part③.
Install part ① connect the wire
16. Open the door, mount door racks
and then close it.
Note： Be sure character side of
reed switch fits well with coping block.
1
2
2
3
9. Screw out the upper hinge axis, turn
the upper hinge over and fix axis on it.
Then place it at side for use.
10. Exchange wires both in the left and
right slots of refrigerator body.
11. Move the door to appropriate
position, adjust part① and the door,
Move the connecting wire② in the slot
of the door from right to left，and then
fix part① and wire② by screws③.
(Please hold the door by hand when
installing)