User`s manual

Hisense Refrigerator
4
Make sure that the plug is not
squashed or damaged. Otherwise, it
may cause short circuit, electric
shock or overheat and even cause a
fire.
Do not insert the mains plug if the
socket is loose, there is a risk of
electric shock or fire.
Switch off the appliance and
disconnect it from the mains power
before you clean or move it.
Never unplug the appliance by
pulling on the electrical cord. Always
grip the plug firmly and pull straight
out from the socket to prevent
damaging the power cord.
Do not operate the appliance
without the light cover of interior
lighting.
Any electrical component must be
replaced or repaired by a qualified
electrician or authorized service
engineer. Only genuine spares
should be used.
Do not look direct into the LED
light located in the refrigerator
compartment with optical
instruments to avoid eye injuries. If
it is not functioning correctly, consult
a qualified, registered electrician or
replace it in accordance with the
“cleaning and care” chapter.
Do not use electrical appliances
such as ice cream makers inside the
food storage compartments of the
appliance, unless they are approved
by the manufacturer.
●
●
●
●
●
●
●
●
Refrigerant
The refrigerant isobutene (R600a) is
contained within the refrigerant
circuit of the appliance, a natural
gas with a high level of
environmental compatibility, which
is nevertheless flammable. During
transportation and installation of the
appliance, ensure that none of the
components of the refrigerant circuit
becomes damaged.
The refrigerant (R600a) is
flammable.
Caution: risk of fire
Don't store products which contain
flammable propellants(e.g. spray
cans ) or explosive substances in
the appliance.
Should the refrigerant circuit be
damaged:
●
Avoid open flames (candles,
lamps
etc.) and sources of ignition.
●
Thoroughly ventilate the room in
which
the appliance is situated.
●