Model MC55250
Contents Safety and warning information_ __ _ _ _ _ 2 Installing your new appliance_ _ _ _ _ _ _ _ 7 Reversing the door _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Using your appliance_ __ _ _ _ _ _ _ _ _ _ _ 12 Helpful hints and tips__ _ _ _ _ _ _ _ _ _ _ _ 12 Cleaning and Care _ _ _ _ _ _ _ _ _ _ _ _ _ 13 Description of the appliance _ _ _ _ _ _ _ _10 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ 15 Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Disposal of the appliance_ _ _ _ _ _ _ _ _ _ 16 This appliance is in accorda
of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it. If this appliance, featuring a magnetic door seals, is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make the spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.
Refrigerant The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged. The refrigerant (R600a) is flammable. Caution:risk of fire If the refrigerant circuit should be damaged: -Avoid opening flames and sources of ignition.
Daily use Do not store flammable gass or liquids in the appliance,There is a risk of an explosion. Do not operate any electrical appliances in the appliance(e.g.electric ice cream makers,mixers etc.). When unplugging always pull the plug from the mains socket,do not pull on the cable. Do not place hot items near the plastic components of this appliance. Store pre-packed frozen food in accordance with the frozen food manufacture’s instructions.
overload the door racks or put too much food in the crisper drawers. Caution! Care and cleaning Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket. Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic solvents or abrasive cleansers. Do not use sharp objects to remove frost from the appliance. Use a plastic scraper. Installation Important! For electrical connection carefully, follow the instructions given in this manual.
1139 636 1749 7 938
Reversing the door screw hole cover screw The side at which the door opens can be upper hinge cover (right) changed from the right side (as supplied) to the left side, if the installation site requires. Tools you will need: 1. 8mm socket driver 3.Unscrew the special flange self-tapping screws which are used for fixing the right upper hinge part by a 8mm socket driver or a spanner(please support the upper door with your hand when doing it ). 2.
7. Lift the lower door and set it on a non scratching surface with the outside up NOTE: When removing the door, watch for washer(s) between the ceter hinge and the bottom of the freezer door that may stick to. the door. Do not lose. 12. Transfer the lower door to the property position, adjust the lower hinge part, make the hinge axis into the lower hole of the lower door, then tight the bolts. 8.
15. Transfer the upper hinge part and make the upper hinge axis into the upper hole of the upper door,and adjust the position of the upper door(please support the upper door with your hand when doing it),fixing the upper hinge part with the special flange selftapping screws. upper hinge part 17. Open the upper door and install the door shelves, then close it. Warning! When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.
Operation Starting up and temperature regulation Changing the light bulb Warning! If the light bulb is damaged.DO NOT CHANG IT BY THE USER! Insert the plug of the connection lead into the plug socket with protective earth contact. When the refrigerator compartment door is opened, the internal lighting is switched on.After the fridge has been placed in position,wait for 5 minutes before electricity is supplied.Don't store anything until the temperature inside the fridge becomes low enough.
Helpful hints and tips Energy saving tips We recommend that you follow the tips below to save energy. ● Try to avoid keeping the door open for long periods in order to conserve energy. ● Ensure the appliance is away from any sources of heat (Direct sunlight, electric oven or cooker etc) ● Don't set the temperature colder than necessary. ● Don't store warm food or evaporating liquid in the appliance. ● Place the appliance in a well ventilated, humidity free, room.
film wrap. Milk bottles: Should have a lid and be stored in the door racks. Hints for freezing ● When first starting-up or after a period out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment. ● Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required.
long. If the frost is too thick, choose a time when the supply of food stocks are low and proceed as follows: 1.Remove existing food and accessories baskets, unplug the appliance from the mains power and leave the doors open. Ventilate the room thoroughly to accelerate the thawing process. 2. When defrosting is completed, clean your freezer as described above. Caution! Don't use sharp objects to remove frost from the freezer compartment.
Troubleshooting If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before calling for service. Warning! Don't try to repair the appliance yourself.
Ensure food is placed within the appliance to allow sufficient A layer of frost occurs in ventilation Ensure that door is fully closed To remove the the compartment frost please refer to cleaning and care chapter Temperature inside is too warm Temperature inside is too cold Doors cant be closed easily Water drips on the floor The light is not working You may have left the doors open too long or too frequently or the doors are kept open by some obstacle or the appliance is located with insufficient cl
