名称 使用说明书 首次使用型号 BCD-249B/HC2(E4) 材料 80g双胶纸 页面规格 A5大小黑白印刷 备注 技术要求 1. 印刷颜色应均匀，且无毛边； 2. 图案和文字清晰，规范； 3. 未注明公差按GB/T 1804-m; 4.
Dear customer, 2 Before placing your new refrigerator/freezer into operation, please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
3 Contents Important safety instructions ------------------------------------------------------- 4 Remove transport packaging----------------------------------------------------------- 10 Installation ------------------------------------------------------------------------------------- 10 Positioning ------------------------------------------------------------------------------------ 10 Description of the appliance ----------------------------------------------------------- 11 View of the appliance ------
4
5
6
7
8
9
10 In case of malfunction If a malfunction occurs on the appliance, please look first in the “ Troubleshooting ” section of these instructions. If the information given there does not help, please do not perform any further repairs yourself. Under no circumstance should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Center.
Description of the appliance 11 View of the appliance 1.LED Bulb & Te mperature Regulator 2.Glass Shelf 3.Crisper Cover 1 4.Crisper 5.Upper Drawer in freezer 2 6.Lower Drawer in freezer 7.Upper Door shelf 8.Water Tank 3 9.Small Shelf 10.Mini Shelf 11.Lower Door shelf 4 7 8 9 10 11 5 6 Reversing the door The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requires.
12 2. Unscrew and lift the lid from the rear and remove it, then lift the upper door and place it on a padded surface to prevent it scratched. 3. Remove the upper hinge core, transfer it to left side and tighten securely, then put it in a safe place. 4. Remove the two flange screw, then remove the middle hinge that hold the lower door in place. Lift the lower door and place it on a padded surface to prevent scratching it. 5.
13 6. Remove both adjustable feet and remove the bottom hinge bracket by unscrewing the bolts. 7. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet. Transfer the lower door to the property position. Secure the doors level, make the bottom hinge pin into the lower hole of the door, then tight the bolts. 8.
14 Warning! When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand. When you reverse the door, please do this first: Move the accessory B from the upper cover of upper door and fit the accessory A that is a small detachable part from a small bag. 1. Remove the screw(1) that hold the door stopper(3) ,then remove the door stopper(3) . 2. Insert the door stopper(2) ,then tighten the screw(1) .
15 Setting 7 (end-stop) means: Lowest temperature, coldest setting. Important! Normally we advise you select setting of 2 or 3 or 4, if you want the temperature warmer or colder please turn the knob to lower or higher setting accordingly. When you turn the knob to lower which can lead to the more energy efficiency. Otherwise, it would result the energy-consuming. Important! High ambient temperatures (e.g.
16 The following are suited for packaging: Polyethylene airtight bags and wraps, Plastic containers with lids; Special plastic covers with elastic, Aluminium foil. Using Water Dispenser This part can help you use the refrigerator with water dispenser easily. Before using Before using the the refrigerator with water dispenser for the first time , please hold the two sides of the water tank part tightly , then lift it carefully . Unscrew the head , clean it and the water tank .
17 Filling water Before filling the water tank with water , ensure that the water tank part is steady and in a correct position 1. Fill with water up to 3L which is suggested ,and not exceed the maximum limit . You can fill water by the following ways. Small lid Large lid Remove the small lid and fill water from the inlet of the large lid . Head Remove the cover ,then fill water directly . Warning! Do not touch other parts when filling water,which can cause water leakage. Dispensing water 1.
18 Before dispensling the water , make sure the lock device is on ”UNLOCK”. When the lock device is on ”LOCK”, it is unlikely receive water. Dispenser lever Suggested position Warning! The lock is defined as “ child lock ”. When the water dispenser is locked , do not push the dispenser lever strongly, which can damage the mechanism . 3.Receiving Water Water receiving containers must be correct cups. Warning! Do not touch the impact pole without cup.
Defrosting 19 Why defrosting Water contained in food or getting into air inside the fridge be opening doors may form a layer pf frost inside. It will weaken the refrigeration when the frost is thick. While it is more than 10mm thick, you should defrost. Defrosting in fresh food storage compartment It is automatically controlled by switching the temperature regulator on or off so that there is no need of operation of defrosting.
Cleaning and Care 20 For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. The fridge should be cleaned and maintained at least every two months. Warning! The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. Never clean the appliance with a steam cleaner.
21 4. Do not set temperature any colder than necessary. 5. The direct cooling refrigerator (with a freezer) needs to be defrosted when necessary. This will improve the cold transfer and reduce energy consumption. 6. The sketch map shows the right combination of the drawers, crisper and shelves which can lead to the more energy efficiency. If users adjust the combination, it would result in the energy-consuming. 7. Store food logically. Do not exceed the storage period specified.
22
23 Changing the light bulb Warning! If the LED light bulb is damaged, DO NOT CHANG IT BY THE USER! Changing the LED light bulb carry out by inexperienced persons may cause injury or serious malfunctioning. It must be replaced by a qualified persons in order to avoid a hazard. Contact your local Service Force Center for help. Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Regulations, Standards, Guidelines 24 This appliance is in accordance with the following EU guidelines: -73/23/EEC low voltage guidelines. -89/336/EEC EMC Directive -2009/125/EC framework for the settting of ecodesign requirements for energy-using -EC.643/2009. requirements four household refrigerating appliances. Disposal of the appliance It is prohibited to dispose of this appliance in domestic household waste.
