User Manual
24
799434
2 PROGRAM TIMER
The program timer makes the cooking process easier by allowing you to see and set
the cooking time for the selected cooking zone. When the time set on the timer expires,
the cooking zone will automatically switch off and emit an acoustic signal. Switch of the
acoustic signal by touching any key; alternatively, it will switch off automatically after a
while.
The switch-off program timer can be set independently for all cooking zones.
The program timer may only be set for an active cooking zone.
Cooking time display – stopwatch
The cooking hob is switched on.
• Press the timer selector key for the desired active cooking zone (T). The key starts to
flash.
• The time elapsed since the relevant cooking zone was switched on and a count-up symbol
(b) are displayed on the timer display unit.
Setting the program timer
The cooking hob is switched on.
• Press the timer selector key for the desired active cooking zone (T). The key starts to flash.
• The time elapsed since the cooking zone was switched on "1:15" and a count-up symbol
(a) are displayed.
• Press the timer display (Z) to set the time to "0:00" and the countdown symbol. Use
the (U) and (V) keys to set the cooking time. The program timer key for the relevant
cooking zone will be fully lit.
• If the time is not set within five seconds using the (U) and (V) keys, the program timer will be
automatically switched off.
• Repeat the same steps to set the program timer or stopwatch for another active cooking
zone.
If the program timer is simultaneously activated for multiple cooking zones, then the
most recently selected time will be displayed on the display unit. When the remaining time
for one of the cooking zone is shorter than one minute, then the time for that cooking zone
will be displayed. The last minute before the expiry of the set time, the time will be displayed
in seconds.
Switching off the program timer
• Touch the program timer selector key to select the program timer or the countdown timer
that you wish to deactivate.
• Simultaneously touch the (U) and (V) timer/minute minder settings keys. Alternatively:
• Touch the (U) timer/minute minder settings key and hold it until "0:00" appears on the
display unit.