Use and Care Guide

Demo mode is for store display, and it prevents the refrigerator from generating cool air.

In this of Cooling off Mode, the refrigerator may seem like it is working but it will not

make cool air. The indicators on the control panel will show double “0F”. To cancel this

mode, press and hold “Ice On/Off” and “Energy Saving” keys at the same time for 3

seconds until the buzzer beep three times and the display panel will light for 3 second.

Demo mode (Freezer/ Fridge Temperature Indicator moving)

Changing the water filter

To drink the freshest and cleanest water from

your refrigerator, change the filter on time.

To change the water filter, follow these steps:

This section tells you how to use most of

the useful features. We recommend that

you read through them carefully before

using the appliance.

Using your Appliance

The water dispenser is located in the left

side of the fridge. Open the refrigerator

doors, and push the water dispenser

button to get water. Then move your

glass down the dispenser lever in the

suggested position and press it.

Hold the glass underneath the dispenser

for 2~3 seconds after releasing the

dispenser button as water may continue

to dispense after the button is released.

Getting Cold Water

About 1.6inch

Shut off the water supply. Then turn the

water filter (K) about a 1/4 turn,

counter-clockwise.

This Demo model can be set only within 10 minutes after startup, otherwise the refrigerator

eeds to be restarted.

CAUTION!

When having problem with releasing water filter,

please use the enclosed tool. Insert the tool into

the filter housing and rotate it counterclockwise

(to the left) 90 degrees.

Please keep for future use when changing the

water filter off the water.

Note