Operation Manual

Hisense Refrigerator
8
Reversing the door
The side at which the door opens can
be changed, from the left side (as
supplied) to the right side, if .
Warning! When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed
from the mains socket.
Tools you will need:
required
8mm socket wrench
Cross-shaped screwdriver
8mm wrench
Thin-blade screwdriver
Note:
in order to
gain access to the base, you should
rest it on soft foam packaging or
similar material to avoid damaging
the backboard of the refrigerator. To
reverse the door, the following steps
are generally recommended.
1. Stand the refrigerator upright.
When required, tilt the
refrigerator back
2. Open part ① on top of the
refrigerator body from left side and then
part ③ and part ④ on the door
in the same way. part ② and
put it back to the plastic bag.
remove
Remove
3. Disconnect electrical connector ①
as well as electrical connector ② and
then part③. remove
4. Remove the screws ① ,
wire②, and remove part③.
loosen
1
3
2
③Upper cover of upper door
②Upper hinge cover (left)
①Upper cover
④Corner cover
3
2
1
buckle