User Guide

Take care not to injure hands

while connecting the hose.

NOTE:

■ To use the bucket without the garden

hose, simply remove the garden hose,

then reinstall bucket.

■ The bucket must be installed and

properly aligned for the dehumidifier to

operate with or without a garden hose

connected.

NOTE:

The garden hose sold separately.■

The connection is designed for North ■

American garden hoses only.

3. Remove bucket.

4. Attach a garden hose to the drain hose

connector on the inside of the dehumidifier.

Securely attach the hose to be sure there is

no water leak.

5. Place the other end of garden hose into a

floor drain. Check to see that the hose lies

flat and is in the drain. Make sure the

draining end of the hose is on a lower level

than the hose connection to the

dehumidifier. The hose should not be

kinked or pinched.

6. Reinstall bucket.

A. Garden hose

B. Drain hose connector

IMPORTANT:

In North America the garden hose connectors are

3/4” diameter straight (non-tapered) thread with a

pitch of 11.5 threads per inch(male part has an

outer diameter of 1 1/16 inches (26.99mm).

When your dehumidifier is operating normally, you may hear sounds such as:

■ Compressor sounds, which may be loud.

■ Air movement from the fan.

■ Clicking sounds when the dehumidifier or compressor turns on and off, and when the Automatic

shut-off Switch is working.