R COLOR TELEVISION OWNER'S MANUAL C2005US Part No: IES050157
WELCOME TO THE BRIGHT AND VIVID WORLD OF COLOR TV Dear customer, Thank you for purchasing this color TV . We wish you many years of viewing pleasure. The goal of this manual is to guide you through setting up and operating your TV as quickly as possible. Please read all the safety and operating instructions carefully before you begin. SAFETY CLASS This is an IEC safety class II (reinforced insulation) product and does not need grounding for safety. CONTENTS Important safety instructions . . . . . . . . .
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product ' s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important safety instructions 12. USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR TABLE SPECIFIED BY THE MANUFACTURER, OR SOLD WITH THE APPARATUS. WHEN A CART IS USED, USE CAUTION WHEN MOVING THE CART/APPARATUS COMBINATION TO AVOID INJURY FROM TIP-OVER. Do not place this TV on an unstable cart, stand, tripod, bracket ,or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. An TV and cart combination should be moved with care.
Brief Operating Instructions 1. Connection Connect the antenna lead or CATV cable or external equipments ( such as Antenna, Cable TV, VCD, DVD, VTR, Set top box, etc .) to the corresponding terminals or interface on the TV rear ( please refer to the owner's manual of the equipment to be connected as well ) and confirm that the signal source is available and works normally.
3. Switching on/off 1 ) Connect the TV to power outlet, the power indicator will display red. Press the power switch or the button on the remote control to turn on the TV. 2 ) Press the power switch or the button on the remote control to turn off the TV. 4. Signal source selection Press the TV/AV button to select TV or AV mode. 5.
Learning about your new TV You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the back panel provide all the connections you will need to connect other equipment to your TV.
Connecting your TV Connecting the audiovisual equipment To enjoy the programs coming from your audiovisual equipment such as VCR, DVD, Satellite receiver, Camcorder, Audio amplifier etc, the signal must be received by the set via the AV input terminals at rear. Connect the devices as the shown below. Note: When connecting YUV (Y Cb Cr) jacks, Audio Left and Right cables should be connected to AUDIO INPUT terminals. TV IN Y Cb S-VIDEO Cr VIDEO AUDIO MONO ANT75 PLAY VIDEO TAPE, DVD etc.
Connecting your TV Connecting a cable converter box This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer premium pay channels in which signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Preparing the remote control for use I nstalling the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size (1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. + + 3. Close the battery cover on to the remote control. Note: 1. Dispose of your batteries in a designated disposal area. Do not throw your batteries into fire. 2. Do not mix battery types or combine used batteries with new ones. 3.
Using the TV features Understanding the TV features Tinted, Bright Black Matrix Picture Tube 181 Channels Selection-All VHF/UHF channels plus up to 125. PLL Frequency Synthesized Tuning-The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection, and lets you tune directly to any channel using the channel number buttons on the remote control.
Using the TV features Using the PRESET menu 1 ) Press the MENU button repeatedly until the PRESET menu appears as shown on the right. 2 ) Press the CH+ or CH- button to select the item you want to adjust. PRESET POSITION SKIP ANTENNA AUTO-SEARCH Select 17 OFF AIR Adjust AUTO-SEARCH The item allows the TV to automatically detect all active channels and store them in its memory. Press CH+ or CH- to start it. You can also press the MENU button to stop the auto search if you want.
Using the TV features Adjusting the picture Adjusting the picture quality 1 ) Press the MENU button, then the PICTURE menu appears as shown on the right. 2 ) Press the CH+ or CH- to select the item you want to adjust. 3 ) Press the VOL- or VOL+ to adjust the level. Note: The items in this menu are explained in details as following.
Using the TV features Using the CLOCK menu 1 ) Press the MENU button repeatedly until the CLOCK menu appears as shown on the right. 2 ) Press the CH+ or CH- to select the item you want to adjust. Note: 1 ) The time you set in this menu is for reference only. 2 ) You must set the item TIME first, otherwise you can not select the other items in this menu. CLOCK TIME ON-TIME OFF-TIME ALARM BESPOKE-TIME POSITION Select : : : : : Adjust TIME The item allows you to set the local time on the TV.
Using the TV features Using the closed caption feature You have two options with the closed caption feature: captions or text. A caption is a printed version of the dialogue, narration and/or sound effects of a TV program. Text is information not related to the program that appears on half of the TV screen. To use the closed caption feature: 1) Press the MENU button on the remote control repeatedly until the OPTION menu appears as shown on the right. 2) Press CH+ or CH- to select the item C.
Using the TV features About TV Ratings The TV ratings are divided into two groups: age-based and content-based.
Using the TV features Displaying the current channel number on screen Press the DISPLAY button on the remote control, and the current channel number will display on the top-right corner of the screen. Whenever you want to cancel it, press the DISPLAY button again. Switching between two channels Press the RECALL button on the remote control to return to the previous channel that you have just viewed. Press the RECALL button repeatedly, and the screen will alternate between the present and previous channels.
Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem Solution TV will not turn on Make sure the power cord is plugged in, then press POWER. The remote control batteries may be dead. Replace the batteries. No picture, no sound Check the antenna/cable connections. No sound, picture OK The sound may be muted. Press VOL+. The station may have broadcast difficulties. Try another channel.
Appendix Specifications C2005US Picture Tube TYPE 20(508mm diagonal ) Television system NTSC standard Channel coverage VHF: 2~13 UHF: 14-69 Cable TV: 2~13,A~W, W+1~W+84, A-5~A-1, 4A Power source 120VAC, 60Hz Power consumption 90W Audio power 2W Speaker type 2 3-11/20 inches 2 Video/Audio terminals S-VIDEO INPUT VIDEO INPUT: RCA connector 1 AUDIO INPUT: RCA connector 2 YCbCr INPUT: RCA connector 3 Dimensions Width: 24-3/5inches Height: 20-7/10inches Depth: 20-1/10inches Weight 46lbs Suppl
Hisense Color TV LIMITED WARRANTY Hisense Corporation warrants this Product(including any accessories)against defects in material or workmanship, subject to any conditions set fourth below: 1. Limited Warranty This limited warranty extends to the original consumer purchaser or any person receiving this TV set as a gift from the original consumer purchaser and to no other purchaser or transferee. 2.
