HR6BMFF453S HR6BMFF453 HR6BMFF453B HR6BMFF453C
Contents Safety and warning information Installing your new appliance Description of the appliance Display controls Using your appliance .2 9 14 15 17 Cleaning and care Helpful hints and tips Troubleshooting Disposal of the appliance 18 20 .22 23 Safety and warning information For your safety and correct usage, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
According to IEC standard This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person being responsible for their safety. Keep all packaging away from children as there is risk of suffocation.
in this appliance. WARNING — If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. WARNING — Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING — Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING — Do not damage the refrigerant circuit.
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged. The refrigerant (R600a) is flammable. It is hazardous for anyone other than an Authorized Service Person to service this appliance.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6.You must not operate the appliance without the interior lighting lamp cover. 1. 7.The fridge is only applied with power supply of single phase alternating current of 220~240V/50Hz. If fluctuation of voltage in the district of user is so large that the voltage exceeds the above scope, for safety sake, be sure to apply A.C. Automatic voltage regulator of more than 350W to the fridge.
straight from the freezer compartment. Do not place the appliance in direct sunlight. Keep burning candles, lamps and other items with naked flames away from the appliance so that do not set the appliance on fire. The appliance is intended for keeping food stuff and/or beverages in normal household as explained in this instruction booklet . You should take care when move it as the appliance is heavy.
appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In this case retain packing. It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation.
Installing your new appliance Before using the appliance for the first time, you should be informed of the following tips. Warning! For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator. The rollers, which are not castors, should be only used for forward or backward movement.
Keep the appliance out of direct sunlight, rain or frost. Stand the appliance away from heat sources such as stoves, fires or heaters. Leveling of appliance For sufficient leveling and air circulating in the lower rear section of the appliance, the bottom feet may need to be adjusted. You can adjust them manually by hand or by using a suitable spanner. To allow the doors to self-close, tilt the top backwards by 10-15mm.
Note: If required you may lay the refrigerator on its back in order to gain access to the base, you should rest it on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator. To reverse the door, the following steps generally recommended. 1. Stand the refrigerator upright. Open the door to take out all door racks (to avoid damage) and then close the door.
stopper-left provided (in the plastic bag) and left stop block to the left side with screw . Keep part and with the appliance for future reference. ③ ① ② 6. Use the Allen wrench(provided in the plastic bag) to loosen screws used to fix the right middle hinge and remove right middle hinge. Then remove the lower door. 8. Change screw hole covers and screw on middle cover plate from left to right (as shown in figure below). 9.
plastic bag) and upper door, then fit the hinge pin into the hinge hole at the top and the door to secure the door in place. Then fix the upper hinge part with screws (Please carefully hold upper door by hand when installing) 10. Stand the refrigerator upright and carefully slot the lower door onto the lower hinge pin and hold in position. install middle hinge-left (in the plastic bag) ensuring the lower door in secured in place. 11.
Description of the appliance ① Control panel part ② Cabinet ③ Door switch ④ Bottle rack ⑤Glass shelf ⑥Wind channel ⑦Crisper cover ⑧Crisper ⑨Twist ice tray ⑩Upper freezer drawer ⑪Middle freezer drawer ⑫Lower freezer drawer ⑬Adjustable bottom foot ⑭Roller ⑮Freezer door ⑯Freezer gasket ⑰Fridge gasket ⑱Fridge door ⑲Lower rack ⑳Small rack Upper rack Mode Part Bottle rack ！ HR6BMFF453S HR6BMFF453 HR6BMFF453B HR6BMFF453C No No No No Note Due to unceasing modification of our products, your refrigerat
Display Controls Use your appliance according to the following guidelines, your appliance has functions as control panel shown in the pictures below. Controlling the temperature We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 4°C and the freezer to -19°C. If you want to change the temperature, follow the instructions below. Caution! When you set a temperature, you set an average temperature for the whole refrigerator cabinet.
3. Super Freeze Super Freeze will quickly lower the temperature within the freezer so food will freeze faster. This can lock in nutrients of food and keep food fresh for longer. Press the middle part of button for 3 seconds to activate the super freeze function. The light will be on. Super freezer will automatically switch off after 52 hours.
Using your appliance “ ” Your appliance has the accessories as the Description of the appliance showed in general, with this part instruction you can have the right way to use them.. We recommend that you read through them carefully before using the appliance Door rack Freezer chamber It is suitable for the storage of canned The freezer chamber is suitable for liquid, bottled drinks and packed food, etc.
Cleaning and care For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly (at least every two months. Warning! The appliance must not be connected to the mains during cleaning as there is a danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains socket. Exterior cleaning Wipe the control panel with a clean, soft cloth.
Door seals cleaning Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning. Caution! Only after the door seals are completely dry should the appliance be powered on Replacing the LED light: Warning: The LED light should be replaced by a competent person. If the LED light is damaged, contact the customer helpline for assistance.
Helpful hints and tips Energy saving tips drawer provided. We recommend that you follow the tips below to save energy. Butter and cheese: Should be wrapped in airtight foil or plastic Try to avoid keeping the door open for long periods in order to conserve energy. film wrap. Milk bottles: Ensure the appliance is away from any Should have a lid and be stored in the sources of heat (Direct sunlight, electric door racks.
1. Remove all food. 2. Remove the power plug from the mains socket. 3. Clean and dry the interior thoroughly. 4. Ensure that all the doors are wedged open slightly to allow air to circulate.
Troubleshooting If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. Warning! Don’t try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service engineer or the shop where you purchased the product.
Check that the air outlets are not blocked by food and ensure A layer of frost occurs in food is placed within the appliance to allow sufficient ventilation. the compartment Ensure that door is fully closed. To remove the frost, please refer to the Cleaning and care chapter.
