Bar code
55U7G 65U7G 75U7G 85U7G QUICK SETUP GUIDE Before using the TV, please read this guide thoroughly and retain it for future reference. For more detailed instructions, please see the User Manual or the E-Manual.
Declaration A
Important Safety Precautions This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. ATTENTION RISK OF SHOCK ELECTRIC Do not open the back cover. This symbol alerts user about the presence of important operating instructions and maintenance in the document enclosed in the package. In no case the user is allowed to operate inside the TV set.
Important Safety Precautions Warning Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using stands recommended by the manufacturer of the television set. Only using furniture that can safely support the television set. Ensuring the television set is not overhanging the edge of the supporting furniture.
Important Safety Precautions Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. A note about safety and operating instructions Read and follow all safety and operating instructions, and retain them safely for future reference. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning.
Important Safety Precautions 9. Power-Cord Protection Power- supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug, wall outlets, and the point where they exit from the TV. MAIN plug is used as the disconnect device, the disconnect device shall remain readily operable. 10.
Important Safety Precautions (d) If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. (e) If the TV has been dropped or the cabinet has been damaged.
Contents Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance. Parts of the software function changes with the system upgrade.
Installing the Stand or Wall Mount Bracket CAUTION Be sure to disconnect the AC power cord before removing a base stand or installing wall mount brackets. The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure. After the installation is complete, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.
Installing the Stand or Wall Mount Bracket For 65" Attention: According to the size of the TV supporting surface, you can select one of the base stand installation patterns, as shown in the figure. Base Stand Base Stand Screws: M5×12 Base Stand Screws: M5×12 Screws: M5×12 Screws: M5×12 Base Stand For 75" Attention: According to the size of the TV supporting surface, you can select one of the base stand installation patterns, as shown in the figure.
Installing the Stand or Wall Mount Bracket Screws: M5×16 Base Stand Screws: M5×16 Base Stand For 85" Follow the illustrations and textual instructions below to complete the installation steps: Two people and above are required. 1. Remove buckles on the upper box. Take out stands, upper cushions and the upper box. Place cushions up side down, make sure grooves face-up and in line. The distance between the two cushions should be less than that of the base holes. 2.
Installing the Stand or Wall Mount Bracket 3. One person holds the television from the front side, the other person takes out 4 screws(M5×16) to install stands as the following steps: Take out cable clamps from stands. Fix stands to the television with screws. Restore cable clamps to stands. Two installation types can be selected according to your needs: A-type(L1R1) span and B-type(L2R2) span.
Installing the Stand or Wall Mount Bracket Installing the Wall Mount Bracket Before mounting the TV, remove the TV stand if you have already attached it, and make sure the wall mount bracket supports the weight of your TV. CAUTION When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury. For 55"/65"/75" ≤15° Place spacers between the TV and bracket.
TV Front TV Front MIC control button for Hands-free Wake-up Joystick button (Standby / Source) / Remote sensor / Power indicator Item Description Remote sensor Receive remote signals from the remote control. Do not put anything near the sensor, as its function may be affected. Power indicator The light is off when the TV is turned on. The light is white in standby mode.
TV Rear TV Rear L AV IN HEADPHONE HDMI 4 (4K@60Hz) VIDEO SERVICE LAN HDMI 2(4K@60Hz) HDMI 3(4K@60Hz) R DIGITAL AUDIO OUT AC Input USB 2 DC 5V 1A(MAX) eARC HDMI 1(4K@60Hz) DC 5V USB 1 0.5A(MAX) ANT For 55"/65" NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. The TV may not be compatible with all external devices.
TV Rear eARC HDMI 2(4K@60Hz) HDMI 1(4K@60Hz) AV IN SERVICE HEADPHONE USB 1 DC 5V 1A(MAX) For 75" AC Input HDMI 4(4K@60Hz) HDMI 3(4K@60Hz) DIGITAL AUDIO OUT USB 2 DC 5V 0.5A(MAX) S ANT LAN NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. The TV may not be compatible with all external devices.
TV Rear HDMI 4(4K@60Hz) HDMI 3(4K@60Hz) DIGITAL AUDIO OUT eARC AC Input HDMI 2(4K@60Hz) HDMI 1(4K@60Hz) AV IN SERVICE HEADPHONE USB 1 DC 5V 1A(MAX) For 85" USB 2 DC 5V 0.5A(MAX) S ANT LAN NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. The TV may not be compatible with all external devices.
Making Connections ANT Connect an outdoor VHF/UHF antenna or cable. Outdoor Antenna TV JACK Cable or ANT OUT ANT (not included) Antenna Cable (75Ω) VHF/UHF Antenna HDMI / AV Connect a HDMI / AV cable from an external AV equipment. No sound connection is needed for HDMI to HDMI connection. If the signal resolution does not match the specification table, you need to change the setting of device according to the table. Please consult your device user manual for instruction.
Making Connections HEADPHONE Connect Headphone for audio out of the TV. TV JACK ATTENTION Excessive sound pressure from earphones and headphones can cause hearing loss. HEADPHONE Headphone (not included) NOTE Please make sure that the headphone you plug in is without microphone function, or it may not be supported. DIGITAL AUDIO OUT Connect to an external digital audio system.
Making Connections USB Connect the USB1.1 and USB2.0 devices such as hard drives, USB sticks and digital cameras for browsing photos, listening music and watching movies. TV JACK USB DC 5V 0.5A(MAX) USB DC 5V 1A(MAX) NOTES When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. If a USB 1.1 or USB2.0 device requires more than 500mA or 5V, the USB device may not be supported. Max supported current for USB 3.
Making Connections Wireless setup Connect your TV to your wireless network, you need a wireless router or modem. See the illustration below. · The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n/ac communication protocols. Wireless router with DHCP Wireless LAN Adapter built-in TV set LAN Cable NOTES You must use the built-in Wireless LAN Adapter to use a wireless network because the set doesn’t support external USB network adapters.
Remote Control Select input sources Power on/ Standby Select a channel or input numbers Display the Channel List on the screen Display the Electronic Program Guide (DTV mode) Special function buttons Quick setup Playpad keys OK / Display the on-screen keyboard Navigation buttons (Up/Down/Left/Right) Exit the menu or exit the application Under the Menu or App, return to the previous place Display the Home screen Volume (up/down) Channel (up/down) Activate the microphone Display subtitles in the
Remote Control Installing Batteries in the Remote Control NOTE: Check information according to the actual remote control in the accessory bag. 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment with the cover. NOTES Product image is only for reference, actual product may vary in appearance.
Remote Control Remote Control Operation Range 1. The remote control can work at a distance of up to 8 meters in front of the TV set. 2. The remote control angle: taking the remote sensor as an apex, 6 meters away, its controlled horizontal angle is within ±30°, while the vertical angle is within ±15°. 3. The operating distance may vary depending on the brightness of the room. Disposal of this unit Product should not be damaged, dismantled or thrown in municipal waste.
Turning the TV on for the First Time Turning the TV on for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. The first time you turn the TV on, it will go straight into the Installation Guide. 3. Press the [ / / < / > ] buttons to navigate the menu and change the settings. Press the [OK] button to confirm. Select your Language Select your desired language to be displayed on the menu. Press menu button to set up your TV for store mode.
Specifications Features, appearance and specifications are subject to change without notice. If you encountered difficulty when setting up your TV, we suggest you refer to the troubleshooting tips in the User Manual or the E-Manual. 55" 65" 1227 × 719 × 78 1447 × 842 × 79 1227 × 781 × 241 1447 × 909 × 283 Without Stand 14.7 19.5 With Stand 15.0 20.
Specifications 75" 85" 1676 × 968 × 85 1900 × 1097 × 84 1676 × 1052 × 368 1900 × 1190 × 416 Without Stand 28.8 50.5 With Stand 29.4 51.3 Active Screen Size (Diagonal) (cm) 189 215 Screen resolution 3840 × 2160 3840 × 2160 Audio power 10W + 10W 15W + 15W Power consumption Please refer to the rating label. Power supply 100 - 240V Standby Power 0.
Other Information What is Freeview Plus? Freeview Plus is a new television service delivered via broadband providing a state of the art Electronic Program Guide (EPG) and seamless access to catch-up TV across the free-to-air networks with the simple press of a button. How does it work? First ensure the TV is connected to internet and an antenna system. Then when you’re watching TV, you’ll briefly see a prompt at the top left of the screen. Press the ‘Green’ button on your remote to launch Freeview Plus.
