65R8 75R8 QUICK SETUP GUIDE Before using the TV, please read this guide thoroughly and retain it for future reference. For more detailed instructions, please see the User Manual.
Declaration A
Important Safety Precautions This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. ATTENTION RISK OF SHOCK ELECTRIC Do not open the back cover. This symbol alerts user about the presence of important operating instructions and maintenance in the document enclosed in the package. In no case the user is allowed to operate inside the TV set.
Important Safety Precautions Warning Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using stands recommended by the manufacturer of the television set. Only using furniture that can safely support the television set. Ensuring the television set is not overhanging the edge of the supporting furniture.
Important Safety Precautions Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. A note about safety and operating instructions Read and follow all safety and operating instructions, and retain them safely for future reference. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning.
Important Safety Precautions 9. Power-Cord Protection Power- supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug, wall outlets, and the point where they exit from the TV. MAIN plug is used as the disconnect device, the disconnect device shall remain readily operable. 10.
Important Safety Precautions (c) If the TV has been exposed to rain or water. (d) If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. (e) If the TV has been dropped or the cabinet has been damaged.
Contents Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance. Parts of the software function changes with the system upgrade.
Installing the Stand or Wall mount bracket Installing the Stand CAUTION Be sure to disconnect the A/C power cord before removing a base stand or installing Wall-Mount brackets. The screen display is very fragile, and must be protected at all times when installing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the screen display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
Installing the Stand or Wall mount bracket 75" BASE STAND 4 screws: M4 × 12 Installing the wall mount bracket (not included) Wall-Mount hole pattern (mm) 400 × 200 (65") 600 × 300 (75") Wall-Mount screw size M6 9.5~11.5mm Wall-Mount Bracket (not included) Screw (not included) Spacer (not included) The TV's rear cover NOTE Follow instructions provided with the Wall mount bracket. The back cover of the TV is slightly curved.
TV Front TV Front Single button (Remote sensor / Power indicator / Standby) Item Description Remote sensor Receive remote signals from the remote control. Do not put anything near the sensor, as its function may be affected. Power indicator The light is red in standby mode. Press the single button when in standby mode, TV will be turned on. Press the single button to call up the menu, when the focus is on "Power Off", wait for 3 seconds, then the TV will go into standby mode automatically.
TV Rear L AV IN R ARC SERVICE DC 5V USB 2 USB 1 VIDEO 0.5A(MAX) LAN 0.5A(MAX) DC 5V HDMI 4(4K@60Hz) DIGITAL AUDIO OUT Power Input HDMI 3(4K@60Hz) HDMI 2(4K@60Hz) HDMI 1(4K@60Hz) HEADPHONE ANT TV Rear NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. The TV may not be compatible with all external devices.
Making Connections ANT Connect an outdoor VHF/UHF antenna or cable. Outdoor Antenna TV JACK Cable or ANT OUT ANT (not included) Antenna Cable (75Ω) VHF/UHF Antenna HDMI / AV Connect a HDMI / AV cable from an external AV equipment. No sound connection is needed for HDMI to HDMI connection. If the signal resolution does not match the specification table, you need to change the setting of device according to the table. Please consult your device user manual for instruction.
Making Connections HEADPHONE Connect Headphone for audio out of the TV. TV JACK ATTENTION Excessive sound pressure from earphones and headphones can cause hearing loss. HEADPHONE Headphone (not included) NOTE Please make sure that the headphone you plug in is without microphone function, or it may not be supported. DIGITAL AUDIO OUT Connect to an external digital audio system.
Making Connections USB Connect the USB1.1 and USB2.0 devices such as hard drives, USB sticks and digital cameras for browsing photos, listening music and watching movies. TV JACK USB 2 USB 1 DC 5V 0.5A(MAX) DC 5V 0.5A(MAX) NOTE When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. If a USB 1.1 or USB2.0 device requires more than 500mA or 5V, the USB device may not be supported. Max supported current for USB 3.
Making Connections Wireless setup Connect your TV to your wireless network, you need a wireless router or modem. See the illustration below. · The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n communication protocols. Wireless router with DHCP Wireless LAN Adapter built-in TV set LAN Cable NOTES You must use the built-in Wireless LAN Adapter to use a wireless network because the set doesn’t support external USB network adapter.
Making Connections What is Freeview Plus? Freeview Plus is a new television service delivered via broadband providing a state of the art Electronic Program Guide (EPG) and seamless access to catch-up TV across the free-to-air networks with the simple press of a button. How does it work? First ensure the TV is connected to internet and an antenna system. Then when you’re watching TV, you’ll briefly see a prompt at the top left of the screen. Press the ‘Green’ button on your remote to launch Freeview Plus.
Remote Control Power Standby button: Power on/ Standby Select input sources Select sound mode Turn on/off the teletext function Enter the Live TV screen Select picture mode Select a channel or input numbers Display the current program information Display the Electronic Program Guide (DTV mode) Display the channel list on the screen Adjust the volume Switch channel Display the Home screen Mute or restore sound Display the Settings menu Navigation buttons (Up/Down/Left/Right) Display the Quick setup
Remote Control Power Indicator and Microphone Display the current program information Select input sources Custom button to launch input or apps quickly Power Standby button: Power on/ Standby All Apps Select a channel or input numbers Display the channel list on the screen Display the Electronic Program Guide Mode (DTV mode) Display the Quick setup menu Special function buttons Confirm button / Display the on-screen keyboard Navigation buttons (Up/Down/Left/Right) Playpad keys Display the Home scre
Remote Control Installing Batteries in the Remote Control NOTE Check information according to the actual remote control in the accessory bag. 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment with the cover. 1. Press the switch and the battery case will pop up automatically. 2.
Remote Control Pairing the Remote Control (only for bluetooth remote control) 1. Press the MENU button, and then select Settings > System > Bluetooth > Remote Pairing. 2. Press and hold the MENU button until your TV and remote control are paired successfully. Make sure your remote is close to this TV around 3 meters. NOTES This function is not available on certain models in specific geographical areas. If an unknown error occurred with the remote then it could have been caused by interference.
Turning the TV on for the First Time Turning the TV on for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. The first time you turn the TV on, it will go straight to the Installation Guide. 3. Press the [ / / < / >] to navigate the menu and change the settings. Press the [OK] button to confirm. Language Select your desired language to be displayed on the menu. Location Select the location where you will operate the TV.
Specifications Features, appearance and specifications are subject to change without notice. If you encountered difficulty when setting up your TV, we suggest you refer to the troubleshooting tips in the User Manual. 65" 75" 1446 × 840 × 58 1668 × 963 × 59 1446 × 920 × 253 1668 × 1061 × 331 Without Stand 24.3 32.7 With Stand 24.8 33.
