Hi sense USER MANUAL Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time.
Figures and Illustrations In this manual are provided for reference only and may differ from actual product appearance. Parts of the software function changes with the system upgrade. Contents Installing the Stand or Wall Mount TV Front and Connection Remote Control Specifications Other Information.
Important Notice Paragraphs beginning with the symbol A Indicate Important Instructions, tips or conditions for the following settings. For your own safety and the optimal performance of your TV, ensure to read the safety Instructions before performing any Installation. Compatibility with 3rd party products, software and services are not guaranteed. We cannot be held liable for any damage or loss suffered whilst operating, using or connecting fo Incompatible devices or apps.
The Intended use and lambent conditions for this TV This TV is intended for the rendering of video and audio signals, on a table-top or wall mounted, in a home or office environment. It must not be used in rooms with a high level of humidity or dust concentration. The warranty Is only valid If used as Intended by the manufacturer. Ave High humidity and dust concentration may lead to current leaks in the device.
u Moving/Transportation Before moving this TV, disconnect all cables and move In the vertical position only. Grasp the device on the upper and lower edges of the frame. Do not press or put stress on the front panel of the TV. It may take two or more people to carry larger TVs. If you have to briefly lay down the TV, place the unit with tts entire front surface lying fiat on soft material. The LED screen is made of glass and can break if is not handled properly. Always wear rubber gloves to Camry the unit.
hanging the power and signal cables on the back of the TV. um Air ventilation and high temperatures Install your TV only where there is proper ventilation, and ensure that there Is at least 10 om free space on the sides and 20 cm above the unit for alr circulation. Excessive heat and obstruction of ventilation could lead to fire or early failure of some electric ‘components. Do not block any ventilation openings with newspapers, tablecloths, curtains, ete. Do not dry clothing etc. on top of the unit.
=u Built-In wireless LAN Do not connect to wireless networks that you do not have the usage rights for. Data transmitted and received over radio waves may be intercepted and monitored. The bully-In wireless LAN uses 2.4 GHz and 5 GHz frequency band. To avoid malfunctions or slow response caused by radio wave interference, keep the TV away from devices such as other wireless LAN devices, microwaves, mobile phones, and other devices that use 2.4 GHz and § GHz signal.
m Packaging Replace only with the same or equivalent type. loop ite ant moll ma totals statistician Do not mix old and new batteries. bags out of react ran. Do not mix different battery types. Plastic bags can cause suffocation and the anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient use rechargeable batteries. Da not bum or break up batteries. vomit and visit the nearest hospital. Be sure to dispose of batteries comely.
Installing the Stand or Wall mount bracket + Be sure to disconnect the AC power cord before installing a stand or wall mount brackets. + The display on your TV Is fragile. Make sure the TV screen Is not scratched or damaged by hard objects or from pressure. «After the installation is completed, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.
TV Front and Rear . Power indicator/ Single button {Standby/Source) tem Description Power Indicator | The light is red in standby mode. Press the single button when in standby mode, and the TV will be muted on. Press the single button to call up the menu. When the focus is on "Power Off", wait for 3 seconds, and then Standby / Source | the TV will go into standby mode automatically. Crass the single button to call up the menu, and then select among the different input signal sources.
Connection » Terminals J o cae [if] Audio AmpitfarfSpeakar Audio Oversimplification receiver Set-top Box — BI NOTE — + Excessive sound pressure from earphones and headphones can cause hearing loss. Yellow(Video) IVORIAN Player! White(L) pro SEER ERR Camera Red(R) BI NOTE Cl+is BI NOTE + Exceeding a total current consumption Do not repeatedly Insert or remove the Common Access Module as this may damage the interface and cause a malfunction.
P LAN (Wired setup) Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Empathetic 5) cable. See the illustration below. It Is recommended to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support CPD automatically provide the IP address, subset mask, gateway, and DNS, so you don't have to enter them manually. Most home networks already have CPD.
Remote Control 5 San. Zsem0o00 OCHOOEE® or cupped | O | [entrust O58; Bf 88 NOTE: The included remote control will vary depending on model, country/region. Check information according to the actual remote control in the accessory bag.
» Buttons of remote control oO Power on/ Standby Number button Select a channel or input numbers Four color bunions Special function bunions.
» Installing Batteries In the Remote Control 1. Slide the back cover to open the battery compartment of the remote control. 2 2. Insert two AAA size batteries. Make sure to match the and ends of the batteries with the and ( ) ends indicated in the battery compartment. 3. Close the battery compartment with the cover. 8 NOTE Product image is only for reference, actual product may vary in appearance. Disease of your batteries in a designated disposal area.
Other Information Recycling/Licenses WERE (Waste Electronic Electric Equipment} Eurasian Directive 2012/19/EU Batteries This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it Is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
