Bar code
LED Backlight TV Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time.
Contents Declaration ................................................................ 2 Declaration and Disposal of Used Electrical & Electronic Equipment 3 Important Safety Warning ..................................................................... 3 Precautions Safeguards................................................................. 4 1.1 Turning your TV on or off ........................................... 6 1.2 Selecting the Input Source ........................................ 6 1.
Declaration Declaration Any content and service accessed through this device, while only intended for individual non-commercial use, shall be the property of the applicable third party and subject to protection by regulations and laws on copyright, patent, trademark and other intellectual property rights.
Important Safety Precautions This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. ATTENTION RISK OF SHOCK ELECTRIC Do not open the back cover. This symbol alerts user about the presence of In no case the user is allowed to operate inside the TV set. important operating instructions and maintenance Only a qualified technician is entitled to operate. in the document enclosed in the package.
Important Safety Precautions Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. A note about safety and operating instructions Read and follow all safety and operating instructions, and retain them safely for future reference. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning.
Important Safety Precautions 11. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. Where installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 12.
Shortcuts Instructions You can use shortcuts on the remote control for fast operation. Refer to the “ Quick Setup Guide ” for more information. 1.1 Turning your TV on or off To turn your TV on or off : 1. Plug the AC power cord into a socket outlet of AC power supply. 2. When the TV is powered on, press the [ ] button on the remote control, to turn TV on or off. NOTES When your TV is in standby mode, it is still consuming power.
Shortcuts Instructions Creating a Favourite List To quickly access your most-watched channels, you can create a Favourite List. To create your Favourite List: 1. Press the [ MENU ] button on your remote to enter the Settings menu. 2. Select Channel > Programme Edit > FAV . 3. Using the [ / v] buttons on your remote, select a channel and press [ FAV ] button. A heart-shaped indicator will appear beside the channel as confirmation that it has been successfully added.
Shortcuts Instructions 1.5 EPG It provides convenience to check TV programs that will be available in the next 7 days. The information displayed by the EPG is made available by the commercial television networks for digital channels only. The EPG also provides a simple way to program the recording of your favorite programs and a reminder function which can switch channel automatically at scheduled time so that you do not miss programs of interest.
Shortcuts Instructions 1.6 PVR/T.Shift PVR The PVR enables the user to easily record the digital television content for later viewing. The function is to be used in DTV source only. The format of storage disk is recommended to be FAT32 . This option does not commerce if the data storage device has not been connected. There are two options, one is to press [ EPG ] button on remote control and then select a program to record by pressing [RED] button, press the [GREEN] button to select reminder.
Menu 2.1 Using the Menu Function To quickly access menu function, press the corresponding keys on your remote. Source Select the Input Source depending on the video device you have connected to your TV. Audio Language Pressing [ Lang. ] buttont select a desired language from the list. Subtitle Select desired subtitles from the list if the selected channel supports multi-language subtitles. Favourite List Press [ FAV ] [ FAV- ] [ FAV+ ] to play your favourite programme.
Menu 2.2 Using the Channel Menu 1. Press the [ MENU ] button on your remote to enter the channel setting menu. In each menu, you can: Press the [ / / < / >] button to select an item, Press the [OK] button to enter the sub-menu or to set on or off, Press the [< / >] button to adjust the value, Press the [EXIT] button to exit the menu. Auto Tuning Automatically scan for channels to view programmes from your TV source. • Tune Type: Perform channel scan for ATV and DTV.
Menu 2.3 Picture Menu In each of picture menu, you can: Press the [ / ] button to select an item, Press the [ OK / > ] button to enter the sub-menu or to set on or off. After finishing your adjustment, press MENU button to save and return back to the previous menu. PICTURE Move MENU Return OK Select EXIT Exit Select a preset picture mode to best suit the content you’re viewing.
Menu 2.4 Sound Menu In each of sound menu, you can: Press the [ / ] button to select an item, Press the [ OK / > ] button to enter the sub-menu or to set on or off. After finishing your adjustment, press MENU button to save and return back to the previous menu. SOUND Move MENU Return OK Select EXIT Exit Select a preset sound mode to suit the type of content you are listening to.
Menu 2.5 Time Menu In each of time menu, you can: Press the [ / ] button to select an item, Press the [ OK / > ] button to enter the sub-menu or to set on or off. After finishing your adjustment, press MENU button to save and return back to the previous menu. TIME Move MENU Return OK Select EXIT Exit Adjust the time settings to suit your preference. • Clock: Set the current time based on your location, set the time to display in 24hour format. • Time Zone: Select your location time zone.
Menu Press the [ < / > ] or [ OK ] button to turn on or off system lock. • System Lock: Enable or disables all locks. Original password is “0000”, and if forget what you set, please call the service center. Lock • Set password: After enter original password “0000” , then enter your new password.If you want to change your lock password, first enter the new password then enter the same password again.
Menu 2.7 Setup Menu Language Teletext Language Audio Languages Subtitle Language Hearing Impaired PVR File System Aspect Ratio Blue Screen Setup Wizard Reset Software Update(USB) Retail Mode HDMI CEC SETUP Move MENU Return OK Select English West English English Off Wide Off Off EXIT Exit Select the language used for this TV . • Language: Set the default language for the TV menu. Language • Teletext Language: Set the Teletext language. • Audio Languages : Set the default language for audio.
Menu Blue Screen Press OK button to display blue background. Reset Restore your TV back to the factory default. Software Update(USB) Retail Mode Update the right software by USB device. Press the [ OK / >] button to selec the retail mode turn on or off. Configure how to control CEC-enabled devices with your TV remote. • CEC Control: Allow HDMI devices to control each other.
Advanced Features 3.1 Media Operation Media is a central location for you to upload and view or listen to different types of content (for example, your photos, music and movies) through the following method: • Plug in USB thumb drive or hard drive: You can stream movies, pictures and photos that are stored on USB device and play or view the content on your TV. NOTE: • If the USB device requires more than 500mA or 5V, the USB device may not be supported.
Other Information 4.1 Troubleshooting If the TV does not operate as usual or appears to be faulty please read carefully this section. Many operational issues can be resolved by users. It is also advisable to unplug the TV from the AC socket on the wall for 60 seconds or more, then reconnect and start again. This simple procedure helps in restoring stable conditions for electric circuits and firmware of the unit.