User's Manual

User Manual Startel 9000X（V3.3）

Fixed Wireless Phone.

STEP1. Check Components

z Fixed Wireless Phone is supplied with the following standard unit and

accessories:

1. STARTEL 9000X Main Unit with Handset

2. Dipole Antenna

3. Chargeable Battery Group

4. User Manual

5. AC/DC Power Adapter

z Please make sure that these components are present before you begin the unit

installation. If components are missing or damaged, contact the store where you

purchased the unit immediately.

STEP2. Place the Phone

z Place the phone on the stable flat secure surface area (desk, table, etc.). Serious

damage may result if the unit falls. Do not place the unit on, or within 1 meter of

heaters or radiators. This unit is designed for desktop usage. Avoid direct

exposure to sunlight and damp area.

z Read the SAFETY INFORMATION located at the first part of this document

before you place the phone.

STEP3. Connect Components (See the figures in “Installation

Steps”.)

z Connect antenna to the antenna connector located at the right side of the phone.

If you have placed the phone on the flat surface, bend the antenna up right.

z Connect curl cord of handset to the RJ-11 port located at the left side of the

phone.

z Open the battery case and install the batteries, then close the case.

z Connect the AC/DC Adapter cable to the DC port located at the back of the

phone.

z Please follow steps below to get better voice quality:

1. Keep the phone away from electrical appliances such as TV, computer, radio

and so on.

2. Keep the phone in a high and central location with no obstructions, such as

metal walls.

3. Raise the integral antenna of phone to get maximum strength of receive