User's Manual

User Manual Startel 9000X（V3.3）
14
1. Press [Messages].
2. Press “Up/Down” to select [Create Message]
3. Input the phone number you want to send or select it from the contacts and press
[Continue] to enter the message edit box, and then input the content you want to
send and press [Continue]. You can select any input method you want.
4. There are two options as Send and Save, you can select to send or save this
message to outbox by press [Send] or [Save].
5. Also you can send the preformatted messages by entering the [Preformatted
Message]. The process is as following: Press [MESSAGE]-> [Preformatted
Message], and use “Up/Down” to select the preformatted message that you
want. The following process is as same as Create Message.
7.3 Erase message
You can erase messages by the following modes.
1. Press [Messages]->[Erase Messages] to enter the erase menu.
2. Press “Up/Down” button to select the erase modes.
There are 4 erase modes including [Entire InBox], [Entire OutBox] and [Old
Inbox]. You can enter Entire Inbox and press [Yes] to erase the entire inbox
messages. Other box erase method is as same as Entire InBox. And if you don’t
want to erase, please select [No].
7.4 Message Setting
You can set some features of the messages
Voice Mail Number
You can set or edit voice mail number.
1. Press [Messages]->[Message Setting]->[Voice Mail Number] to enter the
setting menu.
2. Press “Left/ Right” to select go back or edit voice mail number .
7.4.1 Message Alert
You can different message alert mode.
1. Press [Messages]->[Message Setting]->[Message Alert] to enter the setting