User's Manual

User Manual Startel 9000X（V3.3）

z Correcting dialing mistakes

1. Press “Clear” button shortly to erase the most recent digit.

2. Press and hold “Clear” button for at least one second to erase all the

entered digits.

z If the phone is locked, enter the lock Code.

z If the call did not go through, press the hook switch and dial again.

z Flashing/Hook Switch

1. While in the middle of a call, pressing the hook switch for less than 1

second will be treated as a flash. After 1 second, the call will be

terminated.

2. Very briefly pressing the hook switch will be ignored.

4.3 Answering a Call

1. When the bell rings, pick up the handset or press “hands free” button.

2. Start conversation.

3. To disconnect the call, replace the handset or press “hands free” again.

4.4 Signal Strength

The quality of calls depends on the signal strength in your area. The stronger the

signal, the better the call quality. The signal strength icon indicates the current

strength as a number of bars. You can see bars according to the strength of received

signal in the upper-left part of the LCD.

4.5 Missed Call Message

If a call is received and not answered, you are informed that you have missed a call.

The latest missed call is displayed on LCD, you can press [CALLS] to read the

details of this missed call or press [OK] to erase “Missed call” message.

5. Contacts