User's Manual

User Manual Startel 9000X（V3.3）
8
first number is selected and dialed out.
6. To disconnect the call, replace the handset or press “hands free” button.
z To enter English character.
Select [Multitap], and press once a keypad to enter the first letter labeled
in the keypad, twice to enter the second letter and 3 times to enter the
third letter.
EX To enter “c”,
Press dial button 2 labeled “ABC” 3 times to enter “c”,
After 2 seconds entering a character, the cursor is moved to the next
position automatically.
Press Volume “Left/Right” button to move the cursor.
Press “Clear” button to erase or correct entered character
z To enter number character.
Select [Numbers], and press the corresponding number button to enter
the number.
z To enter specific character.
Select [Symbols], and press the corresponding number button to enter the
specific character. There are 30 symbols corresponding to the number,
and you can press “Up/Down” button to change the characters
representing by 1-9 number buttons.
z Make a call with a speed dial
Refer to Speed Dial List in 6.5 Speed Dial List for more details.
If you input one less than 2 digits (including 2) number and press “Send”, then the
entry stored in this location is selected and dialed out
4.2 Redialing Last Outgoing Number
1. Pick up the handset or press “hands free” button.
2. Listen for dial tone.
3. Press “RDL” button. The last number that you called will be re-dialed.