User's Manual

Charging the Battery

New batteries are shipped partially charged. Before you

can use your phone, you need to charge the battery, as

indicated by the following instructions. Some batteries

perform best after several full charge/discharge cycles.

Plug the travel charger into your phone’s connector port

with the arrow facing up.

Plug the other end of the travel charger into the appropriate

electrical outlet (100~230VAC).

When your phone indicates that the battery is fully charged,

press the release tab and remove the travel charger.

Note:

Before charge, make sure the battery is installed in the

phone.

The battery can discharge gradually even when your

phone is powered off. If the battery is drained for a long

time, the information stored in the phone could possibly be

lost.

If this makes no effect, stop charge and send the charger

for repair.

If the battery’s charge is extremely low, the LCD may not

light even when charge has begun. After a period of charge

then the LCD can light.

Battery Level Indicator

Your Phone is equipped with a Lithium Ion (Li-Ion) battery

which can be recharged before completely drained.

Battery Level Indicator changes according to the battery’s

charge volume as below: