User's Manual

4
Removing the Battery
Make sure your phone is powered off or you will loose any
unsaved information.
Button up the middle of the bottom battery and pull it out.
Inserting card
Before installing the card, always make sure the phone is
switched off and then remove the battery.
Your phone must work with an active card provided by your
service provider.
1. Slide the SIM card carefully into the SIM card slot.
2. Make sure that the golden connectors on the card are
facing downwards and the beveled corner is on the right.
Insert the battery and casing.(make sure the UIM card on
the bottom)
Note:
If no card is inserted or your card is damaged, then your
phone’s LCD will display “Insert card” when it’s powered
on.
If your card is PIN-locked, your phone will display “unlock
PIN”. You must enter PIN before the phone can start
operations. Please contact your network service provider.
When inserting card, please keep it away from possible
damage caused by static, scratch or bend, and put it where
is not available for children.