User's Manual
Table Of Contents
- Installation
- Contents
- Safety instructions
- General safety instructions
- Certified usage
- Installation site requirements
- Device casing
- Qualification requirements for personnel
- National and international safety regulations
- Grounding the device
- Lightning protection
- Requirements for connecting electrical wires
- Requirements for connecting the supply voltage
- ATEX directive 2014/34/EU – specific regulations for safe operation
- Relevant for use in explosion hazard areas (Hazardous Locations, Class I, Division 2):
- E marking
- CE marking
- LED or laser components
- FCC note
- Note for the use in the Japan
- Note for the use in Oman
- Recycling note
- About this manual
- Key
- 1 Description
- 1.1 General description
- 1.2 Device name and product code
- 1.3 Device view
- 1.4 Power supply
- 1.4.1 Supply voltage with the characteristic value C (24 V DC ... 48 V DC)
- 1.4.2 Supply voltage with the characteristic value K (60 V DC ... 250 V DC / 110 V AC ... 230 V AC, 50 Hz ... 60 Hz)
- 1.4.3 Supply voltage with the characteristic value P (Power supply only through PoE)
- 1.4.4 Supply voltage with the characteristic value W (24 V DC)
- 1.5 Ethernet ports
- 1.6 Connections for antennas
- 1.7 Display elements
- 1.8 Management interfaces
- 1.9 Signal contact
- 1.10 Reset button
- 2 Installation
- 3 Making basic settings
- 4 First login (Password change)
- 5 Obtain compliance for operation in the European Union
- 6 Configuring the transmit power
- 7 Configuring the transmit power for the 4.9 GHz band
- 8 Maintenance and service
- 9 Disassembly
- 10 Technical data
- 10.1 General technical data
- 10.2 Dimension drawings
- 10.3 Radio technology
- 10.4 Roaming
- 10.5 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN1 (Approvals 2, characteristic value M or 9)
- 10.6 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN1 for device variants with approval for the 4.9 GHz band (Approvals 2, characteristic value P)
- 10.7 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN2 for high-gain antennas (Approvals 2, characteristic value H)
- 10.8 EMC and immunity
- 10.9 Network range
- 10.10 Power consumption/power output
- 11 Scope of delivery, order numbers and accessories
- 12 Underlying technical standards
- A Further support
Installation BAT-F
Release
18
07/2020
83
M-SFP-LX/LC 943 015-001
M-SFP-LX/LC-EEC 943 897-001
M-SFP-LH/LC 943 042-001
M-SFP-LH/LC-EEC 943 898-001
M-SFP-LH+/LC 943 049-001
Other accessories Order number
0986 EMC 600, field-attachable M12 plug for Gigabit Ethernet data
cables
Available at ICOS
934 637-032
0986 EMC 102, field-attachable M12 plug for Fast Ethernet data
cables
Available at
Lumberg Automation
71327
50 terminating resistors for sealing unused antenna connections, N
(10 pieces)
942 118-001
7/8 plug for supply voltage with characteristic value K (60 V DC ...
250 V DC / 110 V AC ... 230 V AC, 50 Hz ... 60 Hz), for cable
diameters 0.24 in ... 0.32 in (6 mm ... 8 mm)
942 086-003
7/8 plug for supply voltage with characteristic value K (60 V DC ...
250 V DC / 110 V AC ... 230 V AC, 50 Hz ... 60 Hz), for cable
diameters 0.32 in to 0.39 in (8 mm bis 10 mm)
Available at
Lumberg Automation:
11206
7/8 plug for supply voltage with characteristic value W (24 V DC)
and C (24 V DC ... 48 V DC), for cable diameters 0.24 in ... 0.32 in
(6 mm ... 8 mm)
942 086-004
7/8 plug for supply voltage with characteristic value W (24 V DC)
and C (24 V DC ... 48 V DC), for cable diameters 0.32 in to 0.39 in
(8 mm bis 10 mm)
Available at
Lumberg Automation:
11216
Antenna cable BAT-CLB-2 N m-f 943 903-514
AutoConfiguration Adapter ACA21-M12 (EEC) 943 913-003
AutoConfiguration Adapter ACA22-M12 (EEC) 942 125-001
BAT-ANT-N-3AGN-IP67 (10 pcs.) 942 110-001
BAT-ANT-Protector m-f 943 903-373
EM12S, field-attachable M12 plug for Fast Ethernet data cables 934 445-001
Pole mounting set for OpenBAT device 942 116-001
Network management software Industrial HiVision 943 156-xxx
PoE power supply unit PC150/36V/48V-IP67, supply voltage
16.8 V DC to 64 V DC
943 968-001
PoE power supply unit PC150/72 V/48V-IP67, supply voltage
50.4 V DC to 154 V DC
943 968-101
SFP mounting tool for IP67 socket 942 079-001
Plug casing for IP67 V1 plug acc. to IEC 61076-3-106 (variant 1) Available at BTR
NETCOM GmbH
Terminal cable: M12 plug, 8-pin on DB9 socket 942 087-001
Protection screw for M12 socket, metal, IP65/67 (25 pieces) 942 057-001
Protection screw for M12 plug, metal, IP65/67 (10 pieces) 942 115-001
Protection cap for 7/8“ plug, metal, IP67 (10 pieces) 942 111-001
Gigabit Ethernet SFP transceiver Order number