User's Manual
Table Of Contents
- Installation
- Contents
- Safety instructions
- General safety instructions
- Certified usage
- Installation site requirements
- Device casing
- Qualification requirements for personnel
- National and international safety regulations
- Grounding the device
- Lightning protection
- Requirements for connecting electrical wires
- Requirements for connecting the supply voltage
- ATEX directive 2014/34/EU – specific regulations for safe operation
- Relevant for use in explosion hazard areas (Hazardous Locations, Class I, Division 2):
- E marking
- CE marking
- LED or laser components
- FCC note
- Note for the use in the Japan
- Note for the use in Oman
- Recycling note
- About this manual
- Key
- 1 Description
- 1.1 General description
- 1.2 Device name and product code
- 1.3 Device view
- 1.4 Power supply
- 1.4.1 Supply voltage with the characteristic value C (24 V DC ... 48 V DC)
- 1.4.2 Supply voltage with the characteristic value K (60 V DC ... 250 V DC / 110 V AC ... 230 V AC, 50 Hz ... 60 Hz)
- 1.4.3 Supply voltage with the characteristic value P (Power supply only through PoE)
- 1.4.4 Supply voltage with the characteristic value W (24 V DC)
- 1.5 Ethernet ports
- 1.6 Connections for antennas
- 1.7 Display elements
- 1.8 Management interfaces
- 1.9 Signal contact
- 1.10 Reset button
- 2 Installation
- 3 Making basic settings
- 4 First login (Password change)
- 5 Obtain compliance for operation in the European Union
- 6 Configuring the transmit power
- 7 Configuring the transmit power for the 4.9 GHz band
- 8 Maintenance and service
- 9 Disassembly
- 10 Technical data
- 10.1 General technical data
- 10.2 Dimension drawings
- 10.3 Radio technology
- 10.4 Roaming
- 10.5 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN1 (Approvals 2, characteristic value M or 9)
- 10.6 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN1 for device variants with approval for the 4.9 GHz band (Approvals 2, characteristic value P)
- 10.7 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN2 for high-gain antennas (Approvals 2, characteristic value H)
- 10.8 EMC and immunity
- 10.9 Network range
- 10.10 Power consumption/power output
- 11 Scope of delivery, order numbers and accessories
- 12 Underlying technical standards
- A Further support
Installation BAT-F
Release
18
07/2020
77
MCS 15 15 dBm -72 dBm
MCS 16 23 dBm -87 dBm
MCS 17 23 dBm -90 dBm
MCS 18 23 dBm -86 dBm
MCS 19 23 dBm -82 dBm
MCS 20 16 dBm -79 dBm
MCS 21 17 dBm -75 dBm
MCS 22 17 dBm -73 dBm
MCS 23 16 dBm -72 dBm
IEEE 802.11n
Frequency range 5.180 GHz to 5.825 GHz (for FCC: 5.180 GHz to 5.240 GHz and
5.745 GHz to 5.825 GHz)
Coding Typical transmit power Typical receiving sensitivity
MCS 0 11 dBm -92 dBm
MCS 1 11 dBm -91 dBm
MCS 2 11 dBm -89 dBm
MCS 3 11 dBm -84 dBm
MCS 4 11 dBm -81 dBm
MCS 5 9 dBm -77 dBm
MCS 6 8 dBm -75 dBm
MCS 7 8 dBm -73 dBm
MCS 8 7 dBm -92 dBm
MCS 9 7 dBm -91 dBm
MCS 10 6 dBm -89 dBm
MCS 11 7 dBm -84 dBm
MCS 12 5 dBm -81 dBm
MCS 13 2 dBm -77 dBm
MCS 14 2 dBm -75 dBm
MCS 15 1 dBm -73 dBm
Table 25: IEEE 802.11n, Frequency range 5.180 GHz to 5.825 GHz (for FCC:
5.180 GHz to 5.240 GHz and 5.745 GHz to 5.825 GHz)
IEEE 802.11n
Frequency range 2.412 GHz to 2.472 GHz (for FCC: 2.412 GHz to 2.462 GHz)
Coding Typical transmit power Typical receiving sensitivity
Table 24: IEEE 802.11n, Frequency range 2.412 GHz to 2.472 GHz (for FCC:
2.412 GHz to 2.462 GHz)