User's Manual
Table Of Contents
- Installation
- Contents
- Safety instructions
- General safety instructions
- Certified usage
- Installation site requirements
- Device casing
- Qualification requirements for personnel
- National and international safety regulations
- Grounding the device
- Lightning protection
- Requirements for connecting electrical wires
- Requirements for connecting the supply voltage
- ATEX directive 2014/34/EU – specific regulations for safe operation
- Relevant for use in explosion hazard areas (Hazardous Locations, Class I, Division 2):
- E marking
- CE marking
- LED or laser components
- FCC note
- Note for the use in the Japan
- Note for the use in Oman
- Recycling note
- About this manual
- Key
- 1 Description
- 1.1 General description
- 1.2 Device name and product code
- 1.3 Device view
- 1.4 Power supply
- 1.4.1 Supply voltage with the characteristic value C (24 V DC ... 48 V DC)
- 1.4.2 Supply voltage with the characteristic value K (60 V DC ... 250 V DC / 110 V AC ... 230 V AC, 50 Hz ... 60 Hz)
- 1.4.3 Supply voltage with the characteristic value P (Power supply only through PoE)
- 1.4.4 Supply voltage with the characteristic value W (24 V DC)
- 1.5 Ethernet ports
- 1.6 Connections for antennas
- 1.7 Display elements
- 1.8 Management interfaces
- 1.9 Signal contact
- 1.10 Reset button
- 2 Installation
- 3 Making basic settings
- 4 First login (Password change)
- 5 Obtain compliance for operation in the European Union
- 6 Configuring the transmit power
- 7 Configuring the transmit power for the 4.9 GHz band
- 8 Maintenance and service
- 9 Disassembly
- 10 Technical data
- 10.1 General technical data
- 10.2 Dimension drawings
- 10.3 Radio technology
- 10.4 Roaming
- 10.5 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN1 (Approvals 2, characteristic value M or 9)
- 10.6 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN1 for device variants with approval for the 4.9 GHz band (Approvals 2, characteristic value P)
- 10.7 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN2 for high-gain antennas (Approvals 2, characteristic value H)
- 10.8 EMC and immunity
- 10.9 Network range
- 10.10 Power consumption/power output
- 11 Scope of delivery, order numbers and accessories
- 12 Underlying technical standards
- A Further support
Installation BAT-F
Release
18
07/2020
69
10.5 Receiving sensitivity, transmit power, and
data rate of the WLAN module version
EWLAN1 (Approvals 2, characteristic
value M or 9)
The values shown in the following tables are the maximum values of the
WLAN module version EWLAN1. The values are in no case to be perceived
as a guaranteed property of the overall product. For some country profiles,
the module reduces data rate and transmit power automatically. The reason
for this are national standards.
10.5.1 IEEE 802.11b
10.5.2 IEEE 802.11g
IEEE 802.11b
Frequency range 2.412 GHz to 2.472 GHz (for FCC: 2.412 GHz to 2.462 GHz)
Data rate Typical transmit power Typical receiving sensitivity
1 Mbit/s 19 dBm -94 dBm
11 Mbit/s 19 dBm -94 dBm
Table 13: IEEE 802.11b, Frequency range 2.412 GHz to 2.472 GHz (for FCC:
2.412 GHz to 2.462 GHz)
IEEE 802.11g
Frequency range 2.412 GHz to 2.472 GHz (for FCC: 2.412 GHz to 2.462 GHz)
Data rate Typical transmit power Typical receiving sensitivity
6 Mbit/s 22 dBm -94 dBm
9 Mbit/s 22 dBm -94 dBm
12 Mbit/s 22 dBm -90 dBm
18 Mbit/s 22 dBm -89 dBm
24 Mbit/s 22 dBm -85 dBm
36 Mbit/s 21 dBm -82 dBm
48 Mbit/s 20 dBm -78 dBm
54 Mbit/s 19 dBm -77 dBm
Table 14: IEEE 802.11g, Frequency range 2.412 GHz to 2.472 GHz (for FCC:
2.412 GHz to 2.462 GHz)