User's Manual
Table Of Contents
- Installation
- Contents
- Safety instructions
- General safety instructions
- Certified usage
- Installation site requirements
- Device casing
- Qualification requirements for personnel
- National and international safety regulations
- Grounding the device
- Lightning protection
- Requirements for connecting electrical wires
- Requirements for connecting the supply voltage
- ATEX directive 2014/34/EU – specific regulations for safe operation
- Relevant for use in explosion hazard areas (Hazardous Locations, Class I, Division 2):
- E marking
- CE marking
- LED or laser components
- FCC note
- Note for the use in the Japan
- Note for the use in Oman
- Recycling note
- About this manual
- Key
- 1 Description
- 1.1 General description
- 1.2 Device name and product code
- 1.3 Device view
- 1.4 Power supply
- 1.4.1 Supply voltage with the characteristic value C (24 V DC ... 48 V DC)
- 1.4.2 Supply voltage with the characteristic value K (60 V DC ... 250 V DC / 110 V AC ... 230 V AC, 50 Hz ... 60 Hz)
- 1.4.3 Supply voltage with the characteristic value P (Power supply only through PoE)
- 1.4.4 Supply voltage with the characteristic value W (24 V DC)
- 1.5 Ethernet ports
- 1.6 Connections for antennas
- 1.7 Display elements
- 1.8 Management interfaces
- 1.9 Signal contact
- 1.10 Reset button
- 2 Installation
- 3 Making basic settings
- 4 First login (Password change)
- 5 Obtain compliance for operation in the European Union
- 6 Configuring the transmit power
- 7 Configuring the transmit power for the 4.9 GHz band
- 8 Maintenance and service
- 9 Disassembly
- 10 Technical data
- 10.1 General technical data
- 10.2 Dimension drawings
- 10.3 Radio technology
- 10.4 Roaming
- 10.5 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN1 (Approvals 2, characteristic value M or 9)
- 10.6 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN1 for device variants with approval for the 4.9 GHz band (Approvals 2, characteristic value P)
- 10.7 Receiving sensitivity, transmit power, and data rate of the WLAN module version EWLAN2 for high-gain antennas (Approvals 2, characteristic value H)
- 10.8 EMC and immunity
- 10.9 Network range
- 10.10 Power consumption/power output
- 11 Scope of delivery, order numbers and accessories
- 12 Underlying technical standards
- A Further support
Installation BAT-F
Release
18
07/2020
5
9 Disassembly 62
9.1 Removing the device 62
9.2 Removing an SFP transceiver (optional) 62
10 Technical data 63
10.1 General technical data 63
10.2 Dimension drawings 65
10.3 Radio technology 68
10.4 Roaming 68
10.5 Receiving sensitivity, transmit power, and data rate of the
WLAN module version EWLAN1 (Approvals 2, characteristic
value M or 9) 69
10.5.1 IEEE 802.11b 69
10.5.2 IEEE 802.11g 69
10.5.3 IEEE 802.11a 70
10.5.4 IEEE 802.11n 70
10.6 Receiving sensitivity, transmit power, and data rate of the
WLAN module version EWLAN1 for device variants with
approval for the 4.9 GHz band (Approvals 2, characteristic
value P) 73
10.6.1 IEEE 802.11a, Bandwidth 5 MHz 73
10.6.2 IEEE 802.11a, Bandwidth 10 MHz 73
10.6.3 IEEE 802.11a, Bandwidth 20 MHz 74
10.7 Receiving sensitivity, transmit power, and data rate of the
WLAN module version EWLAN2 for high-gain antennas
(Approvals 2, characteristic value H) 75
10.7.1 IEEE 802.11b 75
10.7.2 IEEE 802.11g 75
10.7.3 IEEE 802.11a 76
10.7.4 IEEE 802.11n 76
10.8 EMC and immunity 78
10.9 Network range 79
10.10 Power consumption/power output 80
11 Scope of delivery, order numbers and
accessories 81