Datasheet

APPLICABLE STANDARD
TIA / EIA – 568 – B.2 CAT5e
RATING
OPERATING
TEMPERATURE RANGE
-55 C
TO
85 C
STORAGE
TEMPERATURE RANGE
-25 C
TO
60 C
VOLTAGE
AC 125 V
CURRENT
1 A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT
AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
X
X
MARKING
CONFIRMED VISUALLY.
X
X
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
100 mA MAX (DC OR 1000 Hz).
230 m MAX.
X
X
(ONE EXAMPLE CONNEC TOR CONFIGURTION
IS S HOW N . )
INSULATION RESISTANCE
100 V DC.
100 M MIN.
X
X
VOLTAGE PROOF
(CONTACT TO CONTACT)
500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
X
X
VOLTAGE PROOF
(CONTACT TO SHIELD)
1500 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
X
－
NEAR END CROSSTALK
(NEXT) LOSS
MEASURED MINIMUM NEXT LOSS FOR EACH.
PAIR COMBINATION AT 100 Hz.
43 dB MIN
X
－
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
200 TIMES INSERTIONS AND EXTRACTIONS.
1)CONTACT RESISTANCE: 250 m MAX.
2)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
－
VIBRATION
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE
0.75 mm, FOR 10 CYCLES IN 3 DIRECTIONS.
1)NO ELECTRICAL DISCONTINUITY OF 5 s.
2)CONTACT RESISTANCE: 250 m MAX.
3)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
－
SHOCK
490
m/s
2
DIRECTIONS OF PULSE
11 ms
AT
3
TIMES FOR
3
DIRECTIONS.
X
－
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
(STEADY STATE)
EXPOSED AT +40 C, 90 TO 95  , 500 h.
1)CONTACT RESISTANCE: 250 m MAX.
2)INSULATION RESISTANCE:
1 M MIN. (AT HIGH HUMIDITY)
10 M MIN. (AT DRY)
3)NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
－
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55±3 → 5 TO 35 → 85±2 → 5 TO 35 C
TIME 30 → 5 MAX → 3 0 → 5 MAX min
UNDER 5 CYCLES.
1)CONTACT RESISTANCE: 250 m MAX.
2)INSULATION RESISTANCE: 100 M MIN.
3)NO DAMAGE, CRACK AND LOOSENESS
OF PART
X
－
CORROSION SALT MIST
EXPOSED IN 5 ％ SALT WATER SPRAY FOR 48 h.
1)CONTACT RESISTANCE: 250 m MAX.
2)NO HEAVY CORROSION.
X
－
RESISTANCE TO
SOLDERING HEAT
SOLDER TEMPERATURE, 260 ± 3 C FOR IMMERSION,
DURATION 5 TO 6 S. (FLOW)
NO DEFORMATION OF CASE AND EXCESSIVE
LOOSENESS OF THE TERMINALS.
X
－
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE, 245 C
FOR IMMERSION, DURATION 3 S. (FLOW)
MIN. 95 ％ OF SOLDER IMMERSED AREA
SHALL BE COVERED NEW SOLDER COATING.
X
－
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
4
1
DIS-E-00002148
SH.KOYAMA
TU.TANIGUCHI
20190305
REMARK
Unless otherwise specified, refer to JIS C 5402.
APPROVED
HO.MIWA
20060223
CHECKED
HO.MIWA
20060223
DESIGNED
TR.WATANABE
20060222
DRAWN
TR.WATANABE
20060222
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC4-122761-02
SPECIFICATION SHEET
PART NO.
TM21R-5C-88(50)
HIROSE ELECTRIC CO., LTD.
CODE NO.
CL222-2893-2-50
4
1/1
FORM HD0011-2-1
１
△
△
１
２
３
STORAGE TEMPERATURE RANGE SHOWS STORAGE CONDITION
FOR UNUSED PRODUCTS INCLUDING PACKING MATERIALS.
FOLLOW THE OPERATING TEMPERATURE RANGE FOR STORAGE
CONDITION AFTER MOUNTING.
APPLICABLE PLUG CONNECTOR:TM21P-88P.
THE OPERATION TEMPERATURE INCLUDES THE RISE
BY CURRENT CARRYING.
３
２
4
May.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.
IncaseofconsiderationforusingAutomotiveequipment/devicewhichdemandhighreliability,kindlycontactoursaleswindowcorrespondents.