Datasheet

195
HR10 Series●Push-Pull Connectors
■How to use a connector
1.Inserting 2.Withdrawing
HR10 TYPEHR10A TYPE
Hold the plug at point A, align the plug guide with the receptacle
guide, and push the plug straight.
The plug will mate with the receptacle smoothly.
Hold the plug connection sleeve B and pull the sleeve straight. The
plug will come off easily.
■Jack (Solder type)
HRS No. Part No. Applicable connector
150-0009-0 HR10-7P-T01 HR10-7P
150-0010-9 HR10-10P-T02 HR10-10P
150-0011-1 HR10-7J-T03 HR10-7J
150-0012-4 HR10-10J-T04 HR10-10J
150-0059-8 HR10-13P-T05 HR10-13P
150-0060-7 HR10-13J-T06 HR10-13J
HR10-10P-T02
HR10-10J-T04
Panel
Plug
A
Cable
Receptacle
Panel
Plug
Cable
A
Receptacle
Panel
B
Cable
Plug Connection sleeve
Panel
Cable
B
Plug connection sleeve
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.