User's Guide

Confidential
P/N HRT2000EUD0011
Rev. A
Page 7 of 8
2. Press the button on the inner side of the handset to speak. The TRANSMIT lamp lights and the
Operator Transmitting Icon (3, Table 2) is displayed.
3. Release the button to listen to connected parties. The Firefighter Transmitting Icon (4, Table 2) is
displayed when one or more person is talking.
4. Adjust the volume of the audio using the VOLUME control.
NOTE: If the VOLUME button is turned off, the System Sound Turned Off icon (7, Table 2) is displayed.
Otherwise, the System Sound Active Icon (6, Table 2) is displayed.
To communicate using the Push-to-Talk function:
1. Press and hold the Push-to-Talk button to communicate with the firefighters. The TRANSMIT lamp
lights and the Operator Transmitting Icon (3, Table 2) is displayed.
2. Release the button to listen to connected parties. The Firefighter Transmitting Icon (4, Table 2) is
displayed when one or more person is talking.
3. Adjust the volume of the audio using the VOLUME control.
NOTE: If the VOLUME button is turned off, the System Sound Turned Off icon (7, Table 2) is displayed.
Otherwise, the System Sound Active Icon (6, Table 2) is displayed.
4. Recording the Audio on a USB Flash Drive
To record communications over a removable USB Flash Drive:
1. Prior to activating the system insert a USB flash storage device in the USB flash drive bay. Recoding
commences automatically.
2. To suspend recording, press the FLASH DRIVE RELEASE button.
3. To restart recording, press the ►button.
To record communications in the event that a USB flash storage device was not inserted in the USB flash
drive bay.
1. Insert a USB flash storage device in the USB flash drive bay.
2. After a few seconds, recoding commences.
3. To suspend recording, press the FLASH DRIVE RELEASE button.
4. To restart recording, press the ►button.
NOTE: The recorded audio can be played back during the console’s operation or at a later stage.
5. Playing Back Audio from a USB Flash Drive
To play back audio when the system is inactive:
1. Insert the FDNY 2642 key into the key slot and turn to the ON position. The red STANDBY lamp is
extinguished and the green ON lamp lights.
2. Once the main screen is displayed, playback can be activated.
3. Press the ►button to commence playback.
4. Press the ■ button to stop playback.
5. Press the ►►| button to skip ahead 20 seconds.
6. Press the |◄◄ button to skip back 20 seconds.