User's Guide

Confidential
P/N HRT2000EUD0011
Rev. A
Page 6 of 8
Control or Indictor
Explanation
5
Display
Indications of various ARCS activities are shown on the Display.
6
Handset
Used to communicate with personnel in the building.
7
Playback controls
Used to review recorded material on the flash drive.
8
Area speaker and
microphone
When the Push-to-Talk button is depressed, communications is via this
internal speaker and microphone (concealed by handset in Figure 2).
9
Volume control
Controls volume on both the handset and the internal speaker.
10
USB flash drive bay
Includes a port for a USB flash drive used to record all communications
on the system.
11
Push-to-Talk button
Depressing the button activates communications via the built-in-speaker.
12
TEST activation button
Activates a system self-test.
13
FLASH DRIVE RELEASE
button
When pressed, opens the flash drive bay door.
Table 2 presents a list of symbols appearing on the ARCS Console Display.
Table 2: Symbols Appearing on the ARCS Console Display
Synbol
Explanation
1
Handset is dormant.
2
Handset is in use.
3
Operator is transmitting.
4
Firefighter is transmitting.
5
System is recording on USB flash drive.
6
System sound is active.
7
System sound is turned off.
8
USB flash drive not inserted in port.
9
USB flash drive inserted in port.
3. Communicating over the Console
To communicate using the handset:
1. Lift the handset from the cradle. The handset active icon is shown on the display (2, Table 2).