Owner manual

Part No. 4801-5331 Rev 2-08 Evolution 1200 51 of 64
WARNING!
Keep High Voltage (Or AC)
Separate From Low Voltage Wires!
8.13 Power Supply Connection
Evolution Back-up
Cabinet
Evolution 3000 16 Stage
Ex
p
ansion Module
Evolution 1200
Control
NOTE: Run power Cables including earth Ground from each Cabinet to a common AC junction box. Do Not run AC power and ground between cabinets.
Inset A (AC Input on PCB 186)
WARNING:
Ensure that the Voltage
Selector Switch shown in Inset
B is set according to the AC Supply voltage. Equipment
damage will occur if this
switch is not set correctly.
Controllers are shipped from
HHI set to 240V.
Inset B
OR
Inset
A