User guide

Part No. 4801-5338 Rev 01-10 Evolution 4000 56 of 86
9.3 Setting Address Switches & LEDs on PCB 191 Stage Board
Inset A
PCB 191 – Stage Switch Board
Inset B: Light Emitting Diode
(LED) Indicators
D12 - Power (MultiColor LED)
ORANGE Both Relay & Logic Power are present.
RED Relay Power ONLY is present.
D11 - Board Status (MultiColor LED)
GREEN Receiving Data
RED Transmitting Data
ORANGE Error
LOCAL NET ADDRESS
Local addresses are assigned by setting a series of three DIP switches on the PCB 191 circuit board. There are
three switches that can be set as shown in the above table. For example, if all three DIP switches are set to
"ON", the Stages are 1 through 8.
Inset B
LOCAL NET ADDRESS
SWX 1
ON
1 2 3
Inset A
DIP Switch Settings
Stage
Address
Assignment
No. 1 No. 2 No. 3
ON ON ON
1 -8
OFF ON ON
9-16
ON OFF ON
17-24
OFF OFF ON
25-32
ON ON OFF
33-40
OFF ON OFF
41-48
Inset B D11 D12