User guide

Part No. 4801-5338 Rev 01-10 Evolution 4000 49 of 86
Insert SD Card
7.16 SD Card Operations
7.16.1 Save/Load Programs
Saving one controllers program settings and downloading those settings to another controller is easily
achievable using a SD memory card. Insert the SD card into the PCB197 Control Board and refer to the
Load and Save instruction screens for step-by-step details. Notice that specific settings as shown will not
be copied and must be reverified. All remaining settings are loaded from the SD Card but must be
reviewed to ensure that the settings are correct for your current setup and livestock age. This Save/Load
feature is available on software version 0.12 and later.