Manual

Manual No. 4801-3001 Rev 7-08 Secondary Sensing System Expansion 40 of 46
Back-Up Status
Current Conditions
Target Conditions
Minimum Vent
Stage Conditions
Historical Data
Alarm Status
Network Status
Program Setup
ENTER
Editor Navigator
4501-6106
This Product Ma y Be Protecte d Under One Or More Of
The Following U.S. Patents: 5,193,483 5,336,131
P 1-9 General Parameters
P1 = Tempe ratu re Unit s
C = Celsius
P2 = Individual Alarm Temperature Limits
F = Fahrenheit
Yes = Temperature Limits Set Individually
No = Temperature Limits Set Identical
P3 = Back-Up Timer Percentage
P4 = Back-Up Stage On Delay
P4 = Back-Up Stage On Delay
P 40-49 Hired-Hand Network
P40 = HH Network Address
NET
P41 = So ft war e Ve rsio n N umb er
P42 = Controller Setup
P43 = Local Network Enable
No = Not Connected (Stand-Alone)
Yes = Connected (EV Network)
P 60-69 Alarm Functions
P62 = Cycle Pressure Alarm
ON = Enab led
OFF = Disabled
P63 = Minimum Vent Cycle Time (Minutes)
PS Sensor Calibration
PS1 = Sensor 1 Calibration
PS2 = Sensor 2 Calibration
PS3 = Sensor 3 Calibration
13.13 Connecting Local Network Connections to the S
3
Expansion
Warning!
Tape Shield To Prevent Damage!
NOTE: Harness to connect Local Network and Secondary Sensing system
together are connected & included in the Secondary Sensing System
Expansion.