User's Manual

Press any key twice except Power and Alarm in standby to toggle the display off/on. When the display is off, press

any key (except Power and Alarm) once to turn the display on for 7 seconds.

Set Up Wizard

After turning Solo on for the first time, the Como Audio logo will be displayed, followed by the Set Up Wizard.

Follow the on-screen instructions for each step. Rotate the Menu knob and push in briefly to select, or use the

Up/Down arrow and Play (which doubles as “Select”) keys on the included remote control.

If your WiFi network requires a password, select “skip WPS” when prompted and use the keypad to enter your

password, then select “OK” to the right. You may find the remote keys handier for entering a password than using

the menu knob.

When prompted, we highly recommend you choose “keep network connected” to maintain accurate time, receive

prompt notification of software updates, and to access Spotify Connect.

If you make a mistake and need to start over again from the beginning, press and hold the Menu knob, select

System Settings, Network, and Network Wizard. If your WiFi network is not shown, press and hold the Menu knob,

select System Settings, then Factory Reset, and start the Set Up Wizard again.

For more detailed information, visit www.comoaudio.com to view the latest, complete user manual and help

videos.

How to use Spotify Connect

You’ll need Spotify Premium to use Connect –

see details overleaf.

1. Add your speakers to your wifi network (see product user instructions for details).

2. Fire up the Spotify app on your phone, tablet or PC using the same wifi network as above.

3. Play a song on Spotify and hit ‘DEVICES AVAILABLE’.

4. Choose your speakers and your music will start playing out loud.

Happy listening.

For more information on how to set up and use Spotify Connect please visit:

www.spotify.com/connect

Alarms:

Press and hold the Menu knob. Select Main Menu, then Alarms, then select Alarm 1 or 2. Set each category as

desired and be sure to select “Save” when you are done or else none of your settings will be saved and the alarm

will not be set. If you choose to wake to one of the Aux inputs, you must have your Aux device playing, such as an

MP3 player, as Solo cannot activate your source device.

To Snooze, press the Menu knob or the Snooze key on the remote. Snooze will re-set each time it is pressed.

To stop the alarm, press Solo’s power button or the Alarm button on the remote.

Bluetooth:

Change Solo’s source to Bluetooth. Open Bluetooth on your device and search/scan for the “Como Solo” name,

then pair and connect. Once you’ve paired and connected you shouldn’t need to do it again. If your device

prompts you to enter a passcode, enter “0000”.