User's Manual

3
Back
1. Power inlet: Insert the included power cord. The internal switching power supply will automatically detect
the correct voltage.
2. DC: For use with an external 20VDC/3A adapter (not included). Never use an adapter and the power cord
simultaneously.
3. Headphones: Connect a set of stereo headphones.
4. Line out: Fixed level output to connect Solo’s audio to a home receiver or other device with an analog audio
input.
5. Auxiliary 1 (Hi-Res): Connect the analog audio out from another device.
6. Auxiliary 2 (Hi-Res): Connect the analog audio out from another device.
7. Optical in (Hi-Res): Connect the audio from your television’s optical output using a Toslink cable (not included)
to hear TV sound. You must access your television’s on-screen settings menu and turn ON the PCM output
and turn your TV speakers Off. Your TV may require several audio settings to be adjusted. When listening to
audio from your TV, you may prefer to change Solo’s EQ from “Flat” to “TV Sound”.
8. USB (Hi-Res): Insert a USB flash drive to playback music files, then rotate the source knob and push in briefly
to select ‘My Music’. This jack will also power Google’s Cast for Audio and Amazon’s Dot (a short USB cable is
included). This jack can also trickle charge many smartphones. Do not exceed the jack’s 5V/1A capacity.
9. Service: For use by authorized service representatives only. Do not connect anything into this input.
10. Speaker: For use only with Como Audio’s Ambiente Companion Speaker (included with the Ambiente set) for
stereo sound.
11. Audio switch: When using Solo independently, set to Mono. When the Ambiente Companion Speaker is
connected, set to ST (Stereo). When using two Solos together as a wireless stereo dedicated left and right pair,
set one Solo to L (Left) and the other to R (Right) when using the Como Connect app.
12. Antenna: Expand and adjust for best FM or DAB reception. This antenna has no effect on WiFi reception.
Remote Control (install the included AAA batteries):
1. Power = Power
2. “I” = Info
3. Speaker X = Mute and Snooze when alarm sounds.
4. Up = Navigate up when in menu. Also acts as seek up when in FM mode. Also
shows station list in DAB mode (use up/down/enter to navigate and select).
5. Left arrow = Track back.
6. Down = Navigate down when in menu. Also acts as seek down when in FM mode.
Also shows station list in DAB mode (use up/down/enter to navigate and select).
7. Play/Pause= Play/Pause. Long press brings up menu; brief press within menu acts
as Select; brief press in Internet radio mode saves tuned station to Favorites.
8. Right arrow = Track forward.
9. 3 Lines = Source icon menu (use up/down/enter to navigate/select source).
10. Clock = Alarm menu (use up/down/enter to navigate and select); Toggle alarms 1 &
2 on and off in standby.
11. Vol +/Vol- = Volume up/down