User's Manual

9
If a WEP/WPA key (password) is required, Radio will display as following:
After a few seconds, Radio will ask you to input the WEP/WPA code and will display the password
entry screen as follows:
a. Rotate the Scroll knob to cycle through the alpha-numeric character list. Press to
select an appointed character.
Note: WEP/WPA pass codes are case-sensitive
b. If you make a mistake while enter your password, select ‘ ’ icon to delete a
character.
c. Press BACK button scroll up or down
to last or next line.
d. Select
icon return to previous track.
e. After selecting the final character of your password, scroll to the ‘
’ icon and press
Scroll knob to enter your code.
It should now successfully connect to your network.
Note
: a. Radio will automatically remember the WEP/WPA code for your network, and other networks you have
used previously.
b. There is no need to re-enter these codes once more, unless perform a <FACTORY RESET>.
Rotate the Scroll knob to cycle through menu list, Radio will display the following:
Select <HELP>, Radio will provide you access code and FAQ solutions.