User's Manual

Connecting to wireless network

Step 1 – Choose Wlan Setting

a. Refer page 6 “choose LAN setting”, rotate the Scroll knob to <WIRELESS>, press to confirm.

Rotate the Scroll knob to <DHCP ENABLE>, press this knob to confirm.

Alternatively, simply take off LAN line from the LAN socket before connecting to network is also

recommend.

Step 2 – Select Your Region

Rotate the Scroll knob to <INTERNET RADIO>, and press to confirm.

Note: If you make a mistake at any point, press the BACK button to go back to the previous screen.

Then the display will show a list of region for your choice.

Rotate the Scroll knob to your region, press to confirm. Radio will save it in memory.

For initially use, waiting for a few minutes, the Radio will ask you to enter network.

Step 3 – Enter Network

In some cases Radio may find more than one network. Rotate the Scroll knob to cycle through the

name list, and then press this knob when the name of your own network is displayed

If your network is not configured to request a password (WEP/WPA), Radio will connect

to the network and display: