User's Manual

Connecting to wired network

Step 1 - Power up Radio

First, connect to your Internet Radio adaptor and ensure the Power LED is light up. In use, Radio can

be switched on or off with the STANDBY/ON

button.

Note: Make sure LAN cable connecting to LAN socket already.

Step 2 – Choose LAN Setting

After a few seconds, this will change to show:

Rotate the Scroll knob to <SYSTEM SETUP>, press to confirm.

Rotate the Scroll knob to <INTERNET SETUP>, press to confirm.

Rotate the Scroll knob to <MANUAL SETTINGS>, press to confirm.

Rotate the Scroll knob to <WIRED>, press to confirm.

Rotate the Scroll knob to <DHCP ENABLE>, press to confirm.

The Wired setting is available now!