User's Manual

9
Step 4 – Access Network
1. In some cases Radio may find more than one network. Press or to cycle through the name list,
and then press SELECT when the name of your own network is displayed.
2. If your network is not configured to request a password (WEP/WPA), radio will connect to the network
and display:
3. If a WEP/WPA key (password) is required, radio will now ask you to input the WEP/WPA code and will
display the password entry screen as follows:
l Press or to cycle through the alpha-numeric character list. Press SELECT to select an
appointed character.
l If you make a mistake while enter your password, select ‘ ’ icon to delete a character.
F Note: a. for , its full name is Backspace.
b. the method of select , or icon is when cursor director to ‘ ’,
continue press or to select.
c. WEP/WPA pass code input is case-sensitive
l Select return to previous track.
l After selecting the final character of your password, press or to and press SELECT.