PRESETS SuperSignal English Deutsch Français Italiano Owner’s Guide v1.
TECHNICAL SUPPORT Should you encounter problems using this product, please refer to the troubleshooting section on page 21 of this owner’s guide. Alternatively, call Revo technical support on : UK 01555 666161 From outside the UK + 44 1555 666161 Alternatively, e-mail support@revo.co.uk or visit the troubleshooting section of our website at: www.revo.co.
CONTENTS WELCOME Thank you for purchasing our SUPERSIGNAL radio.
ANATOMY OF SUPERSIGNAL Power/Standby Volume Dial Joystick Controller Select Button PRESETS Station Presets 1 - 5 Super Signal Mode Menu Telescopic Antenna Info Alarm Kensington Lock Slot （for security purpose to prevent the product by taking away in the shop Touch-Snooze Area Stereo RCA Connectors 3.5mm Headphone Connector 04 Aux-In DC Power Socket Update Port （For software updates by Revo only during after sales service.
REMOTE CONTROL 11 01 - Mode 02 - Skip Back (Fast Rewind) 03 - Select 04 - Info 1 06 - Presets 1-8 12 MODE 05 - Scroll Down 13 2 14 07 - Skip Back 08 - Play 3 4 10 - Sleep 5 15 INFO 11 - Scroll Up 12 - Power ALARM VOL - 16 17 1 2 3 4 5 6 7 8 6 14 - Volume Increase 15 - Right (Forward) VOL + SELECT 09 - Future Development 13 - Menu MENU 18 7 16 - Volume Decrease 17 - Alarm 18 - Skip Forward (Fast Forward) 19 - Pause 19 8 9 20 F1 SLEEP SNOOZE F2 21 10 20 - Future Dev
POWER SUPPLY (PSU) Your SUPERSIGNAL radio is supplied with a multi-region power supply, meaning that it can be operated in a number of countries around the world. Simply choose the correct adaptor for your country from the selection supplied, then follow the instructions below. $ !"# 2 SUPERSIGNAL will automatically perform a scan to see what DAB stations are being broadcast in your area. Therefore please fully extend the antenna before switching on.
CONTROLLING SUPERSIGNAL In order for you to get the most from your radio, it is important for you to understand how its joystick and menu system operates. JOYSTICK CONTROL Your radio uses a joystick based control system for ease of use. The joystick controller has four functions (UP, DOWN, LEFT and RIGHT) and is used in conjunction with a separate SELECT button. ‘UP’ ‘LEFT’ ‘RIGHT’ MENU BUTTON ‘DOWN’ Pressing the button will take you to the Mode Menu for the particular mode of operation you are in.
DAB RADIO MODE GETTING READY FOR DAB OPERATION Please ensure that the radio’s antenna is extended before operation in DAB Mode. When you switch on SUPERSIGNAL for the first time, it will automatically perform a scan to see what stations are being braodcast in your area, before storing them alphabetically in the radio’s memory. To enter DAB MODE, press the button until the DAB MODE intro screen is displayed. 00:00 Scanning...
DAB RADIO MODE SELECTING A STATION To access your radio’s station list, press UP/DOWN or LEFT/RIGHT on the joystick controller at any time, alternatively press then select STATION LIST. Scroll through the available stations using UP/DOWN or LEFT/RIGHT on the joystick controller, then press the SELECT button to select your station choice.
DAB MODE MENU OPTIONS STATION INFO In DAB MODE, SUPERSIGNAL is capable of displaying various pieces of information on its screen. By pressing the button, you can sequentially cycle through the following types of information. STANDARD DAB SCREEN Shows scrolling text info from broadcaster 14:12 BBC Radio 6Music Playing PROGRAMME TYPE For example News, Rock Music, Classical etc.
DAB MODE MENU OPTIONS DYNAMIC RANGE COMPRESSION (DRC) If you are listening to music with a high dynamic range in a noisy environment (for example, classical music while cooking), you may wish to compress the audio’s dynamic range. This has the effect of making quiet sounds louder, and loud sounds quieter. To change the DRC setting, press then choose the DRC option, 14:12 DAB 14:12 DRC before selecting OFF, LOW or HIGH.
FM RADIO MODE FM OPERATION Please ensure that the radio’s antenna is extended before operation in FM MODE. To enter FM MODE, press the screen is displayed. button until the FM MODE intro If this is the first time that SUPERSIGNAL has been used in FM MODE, it will start at the beginning of the frequency range (87.50MHz), otherwise SUPERSIGNAL will default to the station that was being listened to last. 14:12 FM Mode 14:12 87.
FM RADIO MODE FM SETTINGS Press the button to access the FM MODE MENU. From here you can set some FM preferences such as SCAN SETTING and AUDIO SETTING. SCAN SETTING allows you to decide whether the radio should stop scanning only when it finds a station with a strong signal. 14:12 FM
BLUETOOTH MODE Wirelessly stream music from your Bluetooth smartphone, tablet, laptop or other Bluetooth enabled device directly to SUPERSIGNAL, without the need for physical docking or connection. PAIRING WITH BLUETOOTH DEVICES ‘Pairing’ occurs when two Bluetooth devices talk to each other and establish a connection.
BLUETOOTH MODE STREAMING MUSIC Selecting and controlling music playback can be done in one of two ways: either directly from the source device (smartphone, tablet or laptop etc.), or by using the buttons on SUPERSIGNAL’s remote control. Please note, the playback volume level can be independently controlled from either SUPERSIGNAL or the source device.
ALARM CLOCK SETTING AN ALARM SUPERSIGNAL is able to store two individual alarm settings. Select which of the Alarms (Alarm 1 or Alarm 2) you would like to modify or enable by pressing once or twice, then select. Use the joystick controller to set each preference (listed below) for your alarm, pressing select to move onto the next preference. • Time • Duration of Alarm • Source: Buzz, DAB or FM • Preset: Last listened or favourite station preset 1-8 • Frequency: Daily, Once, Weekends or Weekdays.
ALARM CLOCK SNOOZE FUNCTION SUPERSIGNAL includes a TOUCH-SNOOZE feature which is incorporated into your radio’s aluminium front panel. SNOOZE is activated by tapping anywhere on the metal area during an alarm. SNOOZE allows you to temporarily silence the alarm for a period of up to 30 minutes. 14:12 Snooze 5 minutes The SNOOZE duration can only be set when your radio is actually in the process of alarming.
SYSTEM SETTINGS SLEEP By using the SLEEP function, you can set SUPERSIGNAL to automatically switch itself into STANDBY mode. 14:12 Press then select SLEEP. You can now set the SLEEP timer to any one of the following; 15, 30, 45, 60 or 90 minutes. DAB When you have selected a sleep duration, SUPERSIGNAL will return to the MODE MENU and will display a small clock icon on the top left of the screen.
SYSTEM SETTINGS AUTO UPDATE Update from ANY : Automatically takes time/date from DAB or FM signals. SUPERSIGNAL needs to have been operated in DAB or FM MODE (and have received a signal) before this information can be extracted. 14:12 Auto Update UPDATE FROM DAB : Forces the radio to take the time/date from DAB signal. UPDATE FROM FM : Forces the radio to take the time/date from FM signal.
SYSTEM SETTINGS FACTORY RESET By selecting FACTORY RESET from the SYSTEM SETTINGS menu, you can reset SUPERSIGNAL to its default factory values, erasing any personal settings that may have been configured (time/date and presets will be erased). To perform a factory reset, press then select FACTORY RESET. Now answer YES. 14:12 Factory Reset? Yes SOFTWARE UPGRADE The SOFTWARE UPGRADE option should only be used when you are asked to do so by Revo Technologies’ technical support department.
TROUBLESHOOTING PROBLEM FM: HISS CAUSE Low signal strength. DAB: Burbling/Intermittent DAB: Cut-Out SOLUTIONS Check/move antenna. Move radio to another location. Rescan local (high-strength) stations only. For DAB, check local coverage at www.ukdigitalradio.com/coverage DAB: ‘No stations available’ Select DISCONNECT from the Bluetooth menu on the radio, and delete SUPERSIGNAL’s profile from your Bluetooth device, then re-pair the devices as normal.
TECHNICAL SUPPORT TEL - + 44 (0) 1555 666161 E-MAIL - support@revo.co.uk WEB - www.revo.co.
