HBT200W Cat. No.
Safety Information 8.Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. the appliance should be connected to power supply only of the type described in the operating instructions or as marked on the appliance The lightning flash with arrowhead symbol within an equilateral triangle is intended to 10.
Contents Safety Information ..............................................................................................................................2 Contents ..............................................................................................................................................3 Introduction.........................................................................................................................................4 Package content.....................................
Introduction Thank you for purchasing the Bluetooth Speaker. Enjoy music wirelessly from your smart phone, tablet, laptop, or other Bluetooth enabled device anywhere you choose.
Front View Control Button Button All mode Press to turn on speaker. Press again to switch speaker into standby mode. Press and hold to disconnect Bluetooth connection. Press to adjust volume level. Illuminate in Red light indicates speaker is in standby mode. Red light off indicates speaker is turned on. Flash 2s in Red light and then off indicates speaker is in Aux Button Indicator mode.
Back View Items Remark: Power cord socket: Connect to DC adaptor. AUX IN socket: It is for connecting the audio cable. USB charging port Output a 5V voltage for charging your personal devices such as your smart phone.
Bluetooth Mode Turning on 1. Before using your new Bluetooth Speaker the first time, you should connect adapter to your speaker. 2. Press Button to switch on. The Indicator flashing fast in Blue light and waiting for pairing with a Bluetooth device or connecting to a paired Bluetooth device. Pairing with Bluetooth devices Pairing occurs when two Bluetooth devices communicate with each other and establish a connection.
Aux in Mode You can use another audio device with your Speaker. This requires using an audio cable with a 3.5mm plug on one end to connect with the Aux input on the Speaker system. 1. Plug the 3.5mm audio cable from the audio device into the Aux connector on the back of the Speaker. 2. Your Speaker will automatically shift to Aux in mode. The Indicator will flash 2s in Red light and then off. 3.
Troubleshooting Problem Speaker will not turn on What to do Make sure your system is connected to a working mains outlet. If your device requires a passkey, make sure the one you entered was Paired Bluetooth correct. device will not Turn the Speaker off and back on. connect Remove the Speaker from the pairing list on your Bluetooth device pairing list. Then pair the device and the Speaker again. Speaker indicates a reconnect the device you want to hear.
Technical information Power supply rating Input: 100-240VAC, 50/60Hz Output: 18VDC, 2A Max Output power 10Wrms x 2 Dimensions H x W x D: 330mm x 135mm x115mm Statements FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the unit at least 20cm from nearby persons.” Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
