User Manual

Fully Modular & Enterprise IoT Development Kit-User Manual
Rev. 3.0/28-11-2017
www.hiotron.com
5.2 Switching Nodes
We can add multiple Nodes under single Gateway or even multiple Gateways. Please refer,
Section 3.2.1 to learn more about how to add Node and Section 3.1.1 for adding Gateway. If
user want to switch Nodes from one Gateway to other it can be done with few simple steps. As
we can see we have two Gateways and two Nodes on the dashboard as shown below:
Let’s suppose we have two Gateways from different applications. And we wish to switch Node-1
from Gateway “ Main Hub ” (G-21) to Gateway “ Second Hub ” (G-22). To do this we must first
click Swap Node option as shown in the picture above. This will present new popup where we
must select Gateway under whom we wish to switch Node-1.
Once Gateway selection done, click on Switch button. And press OK then please do not forget
to Refresh the Page once. After this step’s we will find Node-1 will be listed under Gateway G-
22 “Second Hub”.