User Manual

Fully Modular & Enterprise IoT Development Kit-User Manual
Rev. 3.0/28-11-2017
www.hiotron.com
3.1.3 Configure
To run a quick test, we will have to configure Gateway as a Node. This can be done very easily.
First let’s browse Device Manager and then click on Configure menu. As show in picture
below:
The popup will appear and we will have to select USE AS A: NODE. Since we want to run a
test we will make Gateway as a Node. Then we must use this Gateway and create a Project. This
will confirm connectivity across gateway and internet network.
Let’s create a small project to run quick test. We must browse Project Manager and click on
Create Project from user dashboard.
The popup will appear on screen. There we can configure project. The first thing is to give name
in this case Test, select a Gateway here in this case G-21, then NODE here since we will be
using gateway as a node we will keep it to Gateway as Node. Make sure to select
CUSTOMIZATION option as “Build your own IOT Project” and simply click on Create.