Data Sheet

!
!
!
Hi-Node Specifications
1) Controller: ATmega328P
2) Flash memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
3) SRAM: 2 KB (ATmega328P)
4) EEPROM: 1 KB (ATmega328P)
5) Input Channels: 2 Analog, 2 Digital
6) Output Channels: L1, L2, L3, L4
7) Pluggable module:
§ On-board - Zig-Bee
§ Modular Extension – BLE4.0, SUB-1
8) Input Voltage: [5V via USB or 3.7V via Li-on18650 rechargeable battery
(Note: Connect the battery properly by following the signs of positive & negative on
power board otherwise wrong battery insertion will damage the board)]
9) Ambient Temperature Range: –40°C to 85°C.
10) Humidity: 5% to 95% (non-condensing)
11) Dimensions: 100x146x32.38 (mm)
! !