Know your Device Modular & Enterprise IoT Development Kit Know Hi-Gate § About Hi-Gate § Hi-Gate Indications § Hi-Gate Specifications Know Hi-Node § About Hi-Node § Hi-Node Indications § Hi-Node Specifications
Know Hi-Gate About Hi-Gate Hi-Gate is the brain of this kit which is fully Modular & Enterprise IoT gateway with TI MODCC3200 at its heart, it offers better computational power to run advance IoT algorithms & communications due to availability of multiple on board connectivity protocols such as Inbound Connectivity Protocols: Zig-Bee, BLE 4.0, SUB-1* & Outbound Connectivity Protocols: (Wi-Fi) 802.11 B/G/N Radio, GSM/GPRS (2G) [Note: Modular shield provision available for Ethernet & 3G, 4G modem].
Hi-Gate Indications Connectivity Indicators LED’s Status State Data communication Signal On Off Only while data reception Rest of the time On GSM mode Blink Off During changing mode No GSM mode On Wi-Fi Mode Blink Connecting to Wi-Fi Off No Wi-Fi Zig-Bee On BLe4.
Hi-Gate Specification 1) 2) 3) 4) Microcontroller: TI-CC3200 ARM® Cortex®-M4 Core at 80 MHz Operating voltage: 2.3V to 3.6V [*Analog Input Maximum 1.5V] Input voltage: 5V (USB) InBound Connectivity: a. Wired i. 2 Input channels ii. 2 Output channels [Be careful! Do not manipulate the Hi-Gate while it’s connected to the 110/230V AC lines] b. Wireless i. On-Board: Zig-Bee, BLE4.0. ii. Modular extension: Sub-1 5) OutBound Connectivity: a. Wireless i. On-Board: Wi-Fi (802.
Know Hi-Node About Hi-Node Hi-Node is a wireless node consist of 3 individual units such as sensor, actuator & power which can be connected in two combinations according to application need.
Hi-Node Indications Individual Node Unit On-Board Functionalities Description Sensor Power Switch Setup LED Switch On/Off node On for 10 sec.
Hi-Node Specifications 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Controller: ATmega328P Flash memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM: 2 KB (ATmega328P) EEPROM: 1 KB (ATmega328P) Input Channels: 2 Analog, 2 Digital Output Channels: L1, L2, L3, L4 Pluggable module: § On-board - Zig-Bee § Modular Extension – BLE4.0, SUB-1 Input Voltage: [5V via USB or 3.
Build your complete IoT solutions right from scratch to Production Reach us If you have further questions or require personal assistance, please contact hIOTron by sending on email Email: support@hiotron.com Visit www.hiotron.com We wish you a beautiful experience with Modular & Enterprise IoT development kit. hIOTron, B-202 Ashoka Plaza Next to Hyatt Regency Viman Nagar, Pune – 411014, India Website: www.hiotron.com Mail id: support@hiotron.
