Data Sheet
MEMORY HiCORDER 8870
-20 (English model)
Note: Test leads are not included. Purchase the leads appropriate for your application separately
CLAMP ON AC/DC HiTESTER
3284
20 A to 200 A AC/DC
CLAMP ON AC/DC HiTESTER
3285
200 A to 2000 A AC/DC
CONVERSION ADAPTER
9199
Female banana terminals to BNC plug
(output)
OUTPUT CORD
9094
3.5-mm mini plug, and
banana plugs, 1.5 m (4.92 ft)
length
Not CE marked
AC ADAPTER
9445
-02/-03
for the 3283/3284/3285, 9V/1A
Clamp tester connection requires
OUTPUT CORD 9094 and
Conversion Adapter 9199.
CLAMP ON PROBE
9132
-50
20 A to 1000 A
CLAMP ON LEAK HiTESTER 3283
10 mA to 200 A AC
CLAMP ON PROBE
9018
-50
10 A to 500 A
Current measurement
Options for Voltage measurement (Not supplied. Purchase together with attachment clips appropriate for your application.)
Case
CARRYING CASE 9782
Includes compartment for options, Resin
coated
Case
SOFT CASE 9812
Includes space for small items, Neoprene
rubber
BATTERY PACK 9780
NiMH, Charges while installed
Battery Pack
Charges while installed in
the HiCORDER
Tip Expanders
Attachment clips are sold separately
from CONNECTION CORD 9790.
Purchase the appropriate attachment
clips for your application separately
Tip Expanders
9790
-01
Tip Expanders
9790
-03
Tip Expanders
9790
-02
Supplied Accessories
PROTECTION SHEET 9809
For LCD protection, pairs of additional
sheets can be purchased separately.
AC ADAPTER 9786
100 to 240 V AC
Removable storage (CF card)
Supplied with PC
Card adapter
PC CARD 256M 9727
(256 MB capacity)
PC CARD 512M 9728
(512 MB capacity)
PC CARD 1G 9729
(1 GB capacity)
PC Card Precaution
Use only PC Cards sold by HIOKI.
Compatibility and performance
are not guaranteed for PC cards
made by other manufacturers. You
may be unable to read from or save
data to such cards.
CONNECTION CORD 9790
(Thin Type) CAT II 300 V, ultra-
flexible 2.8 mm (0.11 in) diameter test
lead cable, 1.5 m (4.92 ft) length
Note: Attachment clips sold separately.
ALLIGATOR CLIP 9790
-01
Red/black set attaches to the ends
of test leads (9790)
GRABBER CLIP 9790
-02
Red/black set attaches to the ends
of test leads (9790)
CONTACT PIN 9790-03
Red/black set attaches to the ends
of test leads (9790)
Recommended
High-Voltage measurement for use with power supply
DIFFERENTIAL PROBE 9322
For up to 2 kV DC or 1 kV AC. Use
with either AC Adapter 9418-15
AC ADAPTER 9418-15
For powering Differential probe
9322, 100 to 240 V AC
CONNECTION CORD 9197
For high voltage (up to 500 V), 1.8 m
(5.91 ft) length
CONNECTION CORD 9198
For low voltage (up to 300 V), 1.7 m
(5.58 ft) length
Voltage measurement
Logic signal measurement (One probe can be installed to provide four channels)
LOGIC PROBE 9327
4-channel type, for voltage/contact signal
ON/OFF detection (response time 0.1
μsec or higher, miniature terminal type)
LOGIC PROBE 9321
-01
4 isolated channels, ON/OFF
detection of AC/DC voltage
(miniature terminal type)
LOGIC PROBE 9320
-01
4-channel type, for voltage/contact signal
ON/OFF detection (response time 0.5
μsec, miniature terminal type)
CONVERSION CABLE 9323
Used for connecting the 9320/9321 and
8870 series MEMORY HiCORDERs,
because the terminal shapes are different.
* This cable is not required for the small-
terminal types 9327, 9320-01, and
9321-01.
Recommended Recommended