Data Sheet

3
Isolated inputs for safe measurements
Isolated analog channel inputs provide CAT II overvoltage protection
safety for measurements of up to 300 V AC and DC (maximum
terminal-to-ground rating). This capability
enables safe simultaneous voltage
measurements of inverter primary and
secondary and stacked battery cells without
damaging the instrument.
■ 300 V isolation between measurement
terminals and HiCORDER chassis
■ 300 V isolation between measurement
terminals
Compact, easy-to-carry design
Volume and weight have both been reduced by 60% from
HIOKI's previously most compact MEMORY HiCORDER,
the 8807-01, to just 40% the volume and 55% the weight.
Easily pack it in your briefcase to accompany you wherever
you go.
■ Only 176 mm wide, 101 mm high
and 41 mm thick
■ Weighs only 600 g even with the
battery pack installed
Easy connection to a PC
Connect to a PC with the supplied USB cable to easily
download data that has been automatically saved to a CF
card. Use the supplied dedicated application program to
display and print waveforms on the PC.
■ Easy USB 2.0 data transfer
■ Dedicated application program for displaying and printing
waveforms
Note: The CF card installed in the HiCORDER appears as a removable disk on the PC, but
communication functions such as the capability to change HiCORDER settings from the PC are not
available.
Floating Voltage
Data is simply saved to a CF card. When
the HiCORDER is connected to a PC
via USB 2.0, the data is quickly copied
from the installed card to the PC: 20,000
waveform screen divisions transfer in about 20
seconds.
Press FILE to display
the stored images
Select the image
See the saved bitmap images on the display!
Save important waveform images instantly with the press
the press of a button. Review images by flipping through
each fi le on the widescreen display.
Take a snapshot of the screen as you would with a digital
camera and play back all of your images instantly.
File -1
File-2
File-3
Move to the next image
Move to the previous image
Move to the next image
Move to the
previous image