User Manual

78
────────────────────────────────────────────────────
4.8 FFT Analysis Function
────────────────────────────────────────────────────
4.8.2 Linear Spectrum [LIN]
Function
Horizontal
cursor
Vertical
cursor
Displays the frequency domain waveform of the input signal, including
magnitude and phase information.
Major applications include:
Determining the peaks of waveform frequency components
Determining the levels of high and low harmonics
Fa = (fa)
= |Fa|exp(jθa)
=|Fa|(cos θa+jsin θa)
LIN-Hz Frequency spectrum display as linear units.
The range is from DC to the maximum frequency range value.
LOG Hz Frequency spectrum display as logarithmic units.
The range is from between 1/400 and 1/4000 of value to the
frequency range value.
Real Linear display of real-number part of the data as voltage
(Nyquist mode)
LIN-REAL Linear display of real-number part of the data as voltage
LIN-IMAG Linear display of imaginary-number part of the data as voltage
LIN-MAG Linear display of analysis data as voltage
LOG-MAG Logarithmic display of analysis data as dB
(0dB reference value: 1 V peak=2V p-p)
PHASE Degrees (deg) display of phase component of data
Imag Linear display of imaginary-number part of the data as voltage
(Nyquist mode)