User Manual

72
────────────────────────────────────────────────────
4.4 Printout of FFT Processing Results (When 8994 PRINTER UNIT is installed.)
────────────────────────────────────────────────────
4.4.1 Setting the Print Mode
Function
display
Meaning
:
The result of calculation are printed as a waveform.
:
The result of calculation are printed as numeric data.
Function
display
Meaning
:
Move the cursor up in the selection window.
:
Move the cursor down in the selection window.
4.4.2 Setting the Auto Print Function
Function
display
Meaning
:
Auto print is disabled.
:
Automatically print the FFT processing results to the
internal printer.
:
Automatically transfer the FFT processing results to
the LAN connected device.
O
p
tional 9333 LAN COMMUNICATOR is re
q
uired.
4.4 Printout of FFT Processing Results
(When 8994 PRINTER UNIT is installed.)
Select the format, waveform, or numerical value should be used to output
FFT processing results.
Procedure
Screen: PRINTER
(1) Setting the printer format
1. Press the
SYSTEM
key to display the PRINTER screen.
2. Move the flashing cursor to the
Print Mode
item.
3. Use the function keys to make a setting.
(2) Setting the print interval
1. When the numerical value is selected, set the print interval. (unit: points)
2. Move the flashing cursor to the
Interval
item.
3. Use the function keys to make a setting.
Printout is automatically carried out after FFT analysis.
Procedure Screen: PRINTER
1. Press the
SYSTEM
key to display the PRINTER screen.
2. Move the flashing cursor to the
Auto Print
item.
3. Use the function keys to make a setting.