User Manual

66
────────────────────────────────────────────────────
4.3 STATUS Settings (FFT)
────────────────────────────────────────────────────
4.3.13 Setting the Analysis Channel
Function
display
Meaning
:
Move the cursor up in the selection window.
:
Move the cursor down in the selection window.
Flashing cursor
NOTE
Select the channel for FFT analysis.
Procedure Screen: STATUS, Waveform display
1. Use the Menu keys to display the desired screen.
2. Move the flashing cursor to the
w1
or
w2
item.
3. Use the function keys or Jog/shuttle control, select the channel.
The values for transmission interval and single impulse response are
calculated from (W2)/(W1).
To analyze data without aliasing distortion due to sampling, we
recommend that you use a channel input module that is capable of FFT
analysis, such as the 8953-10 HIGH RESOLUTION UNIT.